Cisco Updated 350-701 Exam Questions and Answers by suleiman

 Cisco ISE supports two types of WebAuth for BYOD: central WebAuth and local WebAuth. Central WebAuth is the default method and it uses the ISE portal to authenticate the users and redirect them to the BYOD portal. Local WebAuth is an alternative method that uses the network access device (NAD) portal to authenticate the users and then redirects them to the ISE BYOD portal. Both methods require the configuration of a guest component on ISE, which is used to create the BYOD portal and the guest user accounts. The guest component also provides the self-service onboarding and registration features for the BYOD users. The dual component is not related to BYOD, but rather to the dual-SSID method, which uses two separate SSIDs for provisioning and access. The null WebAuth component is not a valid option for BYOD. References :=

Some possible references are:

Cisco ISE BYOD Prescriptive Deployment Guide

Configure Single SSID Wireless BYOD on Windows and ISE

Cisco ISE for BYOD and Secure Unified Access, 2nd Edition

Posture is a service in Cisco ISE that checks the compliance of endpoints with corporate security policies before allowing them to connect to the network. Posture policies define the requirements that endpoints must meet to be compliant, such as having antivirus software installed and updated, or having a specific registry key value. If an endpoint is compliant, Cisco ISE can apply a Change of Authorization (CoA) to grant it access to the network resources. CoA is a mechanism that allows Cisco ISE to dynamically change the authorization attributes of an existing session, such as VLAN, dACL, or SGT, without requiring the user to reauthenticate. CoA can be triggered by various events, such as posture assessment results, profiling changes, or manual actions by the administrator. CoA can also be used to quarantine or disconnect non-compliant endpoints. Therefore, ensuring that an endpoint is compliant with a posture policy configured in Cisco ISE provides the benefit of allowing CoA to be applied if the endpoint status is compliant. References :=

Cisco Identity Services Engine Administrator Guide, Release 2.2 - Configure Client Posture Policies

Cisco Identity Services Engine Administrator Guide, Release 2.2 - Change of Authorization

DHCP option 82 is a feature that allows the network access device (NAD) to insert additional information into the DHCP request packet from the endpoint. This information can include the switch ID, port number, VLAN ID, and other attributes that can help Cisco ISE to identify and profile the endpoint. Cisco ISE can use DHCP option 82 to assign the endpoint to the appropriate identity group, policy, and authorization profile. DHCP option 82 is also useful to prevent rogue DHCP servers from assigning IP addresses to endpoints, as Cisco ISE can verify the legitimacy of the DHCP request based on the option 82 data. To use DHCP option 82, the NAD must be configured to enable this feature and send the option 82 data to Cisco ISE. Cisco ISE must also be configured to accept and parse the option 82 data from the NAD. For more details on how to configure DHCP option 82 on Cisco ISE and NAD, see the references below. References:

Configuring the DHCP Probe

Securing Your Network From DHCP Risks

Can we use ISE as DHCP/DNS server to prevent guest traffic using …