Cisco Updated 350-701 Exam Questions and Answers by kiyaan

Network telemetry is a technology that allows network devices to push data to a collector in real time, rather than waiting for the collector to pull data from them. This improves the efficiency and accuracy of data collection, and enables the monitoring of a large number of network devices. SNMP, on the other hand, is a protocol that uses a pull model, where the collector requests data from the devices periodically. This can cause delays, gaps, and overhead in data collection, and limit the scalability of network monitoring. Therefore, network telemetry has an advantage over SNMP pulls in terms of scalability. References:

What Is Telemetry? Telemetry vs. SNMP - Huawei

Streaming telemetry challenges SNMP in large, complex networks

Network streaming telemetry: Monitoring in “real-time” - Paessler

An Overview of Network Telemetry - Geek Speak - Resources - THWACK

To share data between multiple security products, you must use Cisco Platform Exchange Grid (pxGrid). pxGrid is an open and scalable framework that allows for bi-directional any-to-any partner platform integrations. pxGrid uses REST and WebSocket interfaces to exchange intelligence and obtain contextual information from Cisco Identity Services Engine (ISE) and other security products. pxGrid can also direct ISE to contain threats by setting network policies. pxGrid enables cross-platform network system collaboration across your IT infrastructure and helps you monitor security, detect threats, and manage assets, configuration, identity, and access. References: Introduction to the Cisco Platform Exchange Grid (pxGrid) in ISE, Cisco Identity Services Engine Administrator Guide, Release 3.3

 Grafana is an open source tool that displays graphs and counters for data streamed from network devices. Cisco uses Grafana to create graphical visualizations of network telemetry on Cisco IOS XE devices, which support model-driven telemetry. Model-driven telemetry is a new approach for network monitoring in which data is streamed from network devices continuously using a push model and provides near real-time access to operational statistics. Applications can subscribe to specific data items they need, by using standard-based YANG data models over NETCONF-YANG. Cisco IOS XE streaming telemetry allows to push data off of the device to an external collector at a much higher frequency, more efficiently, as well as data on-change streaming. Grafana uses the data from InfluxDB database to build dashboards and graphs. InfluxDB is a time-series database that stores the telemetry data received from the network devices. Telegraf is an agent that collects the telemetry data from the network devices and pushes it to InfluxDB. The TIG software stack refers to the three open-source software components that enable receiving, storing, and visualization the telemetry data: Telegraf, InfluxDB, and Grafana. References :=

Enterprise Streaming Telemetry and You: Getting Started with Model Driven Telemetry - Cisco Blogs

Explore Model-Driven Telemetry - Cisco Blogs

Telemetry Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.8.x - Dial-Out Telemetry Session from Router to Destination

Free 350-701 Implementing and Operating Cisco Security Core Technologies Practice Test Questions

Explanation

"configure INTRUSION RULES for DNP3" -> Documentation states, that enabling INTRUSION RULES is mandatory for CIP to work + required preprocessors (in Network Access Policy - NAP) will be enabled automatically:

"If you want the CIP preprocessor rules listed in the following table to generate events, you MUST enable them. See Setting Intrusion Rule States for information on enabling rules."

"If the Modbus, DNP3, or CIP preprocessor is disabled, and you enable and deploy an intrusion rule that requires one of these preprocessors, the system automatically uses the required preprocessor, with its current settings, although the preprocessor remains disabled in the web interface for the corresponding network analysis policy."

[1] https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config-guide-v63/scada_preprocessors.html