CompTIA Updated 220-1201 Exam Questions and Answers by lee

Dot matrix printersuse aninked ribbonthat physically contacts the paper through tiny pins. Over time, the ribbon wears out or dries up, resulting infaded or light print output. Replacing the ribbon restores print quality.

Option A:Cleaning helps with image clarity, not ink density.

Option C:Maintenance kits apply to laser printers, not dot matrix.

Option D:Calibration affects print position, not darkness.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.7: Given a scenario, troubleshoot common printer problems.

===========

VoIP traffic is highly sensitive to latency, jitter, and packet loss, even when overall internet bandwidth appears sufficient. According to CompTIA Core 1 (220-1201) networking and VoIP troubleshooting objectives, normal speed test results do not guarantee good VoIP performance because speed tests measure throughput, not real-time traffic prioritization.

In this scenario, users experience choppy audio and lag, which are classic symptoms of voice packets competing with regular data traffic during periods of network utilization. Enabling Quality of Service (QoS) on the router allows the network to prioritize VoIP traffic over less time-sensitive data such as web browsing, file downloads, or streaming. This ensures voice packets are transmitted with minimal delay, improving call clarity and reliability.

Configuring PoE only supplies power to VoIP phones and does not affect call quality. Changing wireless encryption standards does not resolve latency or prioritization issues. MAC address filtering is a security feature and has no impact on VoIP performance.

CompTIA emphasizes QoS as a key solution for resolving VoIP performance issues in environments where bandwidth exists but voice traffic is not properly prioritized.

802.11ac is a Wi-Fi standard that primarily operates in the 5GHz band and is known for higher throughput and improved performance compared with older 2.4GHz-focused standards. In CompTIA A+ Core 1 networking objectives, you are expected to recognize which IEEE 802.11 standards map to which frequency bands and the typical trade-offs. The 5GHz band generally provides more available non-overlapping channels and less interference from common household devices (like microwaves and many Bluetooth peripherals), which can improve real-world performance. While 5GHz typically has shorter range and weaker wall penetration than 2.4GHz, it often delivers better speeds in the same-room or nearby-room scenarios, which aligns with how 802.11ac is commonly deployed.

Bluetooth primarily uses the 2.4GHz ISM band and is designed for short-range personal area networking rather than high-speed WLAN connections. NFC operates at 13.56MHz for very short-range tap-based communications. RFID can operate at several bands (low frequency, high frequency, ultra-high frequency) depending on the use case, but it is not a Wi-Fi networking standard and does not “primarily” operate at 5GHz. Therefore, the correct answer is 802.11ac.

Printers in SOHO environments must maintain a consistent IP address so devices can regularly locate them for scanning and printing tasks. CompTIA A+ emphasizes assigning static IPs to network printers to prevent address changes that occur with DHCP.

Laptops can remain DHCP clients because their address consistency is less critical. APIPA cannot communicate across networks and therefore should not be used. Assigning public IPs is incorrect and unsafe.

By giving the printer a static IP within the same subnet, all laptops can reliably access it, and the network remains organized and functional exactly as the A+ objectives recommend.