CompTIA Updated 220-1201 Exam Questions and Answers by rosanna

When a device is supposed to receive a specific “pre-allocated” address from DHCP, that typically means a DHCP reservation has been created. DHCP reservations work by mapping a specific MAC address to a chosen IP address so that when that exact device requests an address, the DHCP server always hands it the reserved IP. If diagnostics show the printer received a different IP than expected, the most likely cause is that the reservation is not being applied—commonly because the reservation references the wrong MAC address (typo, using the wrong interface, or copying the MAC of another port such as Wi-Fi vs Ethernet). Verifying the printer’s actual MAC address and matching it to the DHCP reservation is the correct next step.

The printer driver on the print server (B) affects printing functionality, not the printer’s DHCP assignment or ability to browse its embedded web server. Subnet mask (C) and default gateway in the pool (D) could cause connectivity issues, but they would not usually explain why the device received an unexpected IP when a reservation was intended. The key mismatch symptom points first to the MAC address in the reservation.

Comprehensive and Detailed Explanation From Exact Extract (Aligned With CompTIA A+ 220-1201 Study Guide)

To run Secure Boot, the system must have:

✔ UEFI firmware (not legacy BIOS)

Secure Boot is a UEFI feature that validates bootloaders using digitally signed keys stored in secure firmware.

✔ TPM (Trusted Platform Module)

The TPM stores cryptographic keys in tamper-resistant hardware, enabling secure key management that cannot be altered by normal users.

CompTIA materials describe TPM as essential for enhanced platform security and for storing validated boot keys when Secure Boot is enabled.

Together, UEFI + TPM provide:

Verified boot loader

Hardware-level key protection

Prevention of unauthorized OS tampering

Non-user-controllable secure key storage

Why the other options are incorrect

A. VDI – Virtual desktops; unrelated to Secure Boot hardware requirements.

B. BIOS password – Helps protect firmware settings but is not required for Secure Boot.

E. Disabled boot drive – Irrelevant to Secure Boot.

F. USB permissions – Not part of Secure Boot requirements.

Final Answer: C, D

A switch is designed to connect multiple devices within the same local network so they can communicate efficiently. In a typical LAN, a switch provides multiple Ethernet ports and forwards traffic between connected devices by using MAC addresses. When a frame enters a switch port, the switch learns the source MAC address and associates it with that port in a MAC address table. When the destination MAC is known, the switch sends the frame only out the correct port, which reduces unnecessary traffic and improves performance compared to older hub-based networks. This is exactly what is meant by allowing multiple network devices to communicate “across a single platform” (the switching fabric).

A NIC is an adapter in an endpoint device that provides network connectivity, but it does not interconnect multiple devices by itself. A firewall focuses on filtering and controlling traffic based on security rules, not primarily on providing multi-device LAN connectivity. Routers connect different networks and forward traffic based on IP addresses (Layer 3), which is not the primary device for multi-device communication within the same network segment. Therefore, the correct answer is Switch.

D. POST Code Beeps:

During the Power-On Self-Test (POST), the BIOS performs checks on system hardware, including RAM. If the RAM is faulty, POST may produce a series of beep codes indicating memory issues.

These beep codes are often the first sign of RAM-related problems, especially if the BSOD occurs randomly.

Incorrect Options:

A. Wrong BIOS configurations: Incorrect BIOS settings may cause boot errors, but they are less likely to cause random BSODs.

B. Continuous reboots: Continuous reboots could result from multiple hardware or software issues but do not specifically point to RAM.

C. Distended capacitors: Faulty capacitors typically affect the motherboard, not the RAM.

Key Takeaway: POST beep codes are a common diagnostic tool for identifying RAM-related issues.