CompTIA Updated 220-1201 Exam Questions and Answers by reid

The symptoms clearly point to a hardware-level signal degradation issue, which is most commonly caused by a malfunctioning or damaged Wi-Fi antenna in the smartphone. CompTIA A+ mobile device troubleshooting emphasizes comparing the affected device ' s signal strength with other nearby devices. In this case, other devices in the same location have stronger Wi-Fi signals, meaning the network itself is functioning normally. The consistent low signal across multiple networks strongly suggests antenna failure.

Modern smartphones use internal antenna assemblies located along the frame or behind the back cover. If the antenna becomes loose, damaged, or obstructed, the device may show weak or unstable Wi-Fi connectivity, especially in crowded environments where strong, stable reception is required to maintain a connection.

Option B (outdated Wi-Fi standard) would limit speed but not cause significant signal weakness compared to surrounding devices. Option C (interference) affects all devices in an area similarly—not just one device. Option D (power settings) may reduce background activity or scanning frequency, but it does not cause consistently low signal strength.

Therefore, the most likely cause is a malfunctioning Wi-Fi antenna inside the smartphone.

Improper seating is the most common reason an SSD isn’t recognized. Ensuring it is correctly connected resolves the issue.

Why Not A (Faulty SSD): A faulty SSD is possible but less likely than an installation issue.

Why Not B (Not formatted): Formatting affects data usability, not drive detection.

Why Not C (Incompatibility): SSD compatibility issues are rare with modern hardware.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 3.3, storage troubleshooting​.

Intermittent display issues, such as a screen flashing on and off, are most commonly caused by a loose or faulty video cable connection. If the power cable is confirmed secure, the next logical step is to check the video (data) cable between the monitor and the computer.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshoot common hardware problems:

" Common video issues include intermittent display or loss of picture. The most likely causes are a loose or faulty video cable or connector. Check all cable connections before troubleshooting internal components. "

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting Hardware Problems

CompTIA Exam Objectives 220-1101, Domain 4.1

============