CompTIA Updated 220-1201 Exam Questions and Answers by hettie

The correct answer is D. Check for loose connections on the display .

According to CompTIA A+ Core 1 220-1201 objectives under Hardware and Display Troubleshooting:

Flickering or strange colored lines on a monitor are often caused by loose or damaged video cable connections (internal or external).

Before considering costly or time-consuming solutions like replacement, the technician should verify that the display cable, internal ribbon cables, or connectors are properly seated.

Why the other options are incorrect:

A. Suggest a secondary monitor: Provides a temporary workaround but does not resolve the underlying hardware issue.

B. Conduct a factory reset: Resets software settings but will not correct physical connection problems that cause flickering or colored lines.

C. Install a screen protector: Does not affect video signal or display functionality; irrelevant for flickering issues.

The correct answer is C. Firewall .

According to the CompTIA A+ Core 1 220-1201 objectives under Networking and Security:

ACL (Access Control List) capabilities allow a device to control the flow of network traffic based on defined rules, such as permitting or denying traffic from specific IP addresses, ports, or protocols.

Firewalls —whether hardware or software—use ACLs to enforce security policies, filtering inbound and outbound traffic to protect networks and devices.

Why the other options are incorrect:

A. PoE injector: Provides power over Ethernet but has no traffic filtering or ACL functionality.

B. DSL: Refers to a type of broadband connection; it does not provide ACLs.

D. Unmanaged switch: Passively forwards traffic without configuration capabilities, so it cannot implement ACLs.

The correct answer is A. NFC (Near Field Communication) .

According to the CompTIA A+ Core 1 220-1201 objectives under Mobile Devices, NFC is commonly used for short-range wireless communication between devices. In the context of mobile printing:

NFC-enabled printers allow a user to tap a mobile device (phone or tablet) to the printer to initiate a print job instantly without needing to configure Wi-Fi credentials or use cables.

This is particularly common in mobile-friendly environments like offices or public kiosks.

Why the other options are incorrect:

B. Hotspot : Provides an Internet connection, not a direct mobile-to-printer interface.

C. Infrared : Legacy technology largely replaced by NFC and Wi-Fi; rarely used in modern printers.

D. USB : Requires a wired connection, not suitable for sending a print job wirelessly from a mobile device.

The correct answer is A. Liquid cooling .

High CPU utilization and intensive graphics workloads generate significant heat. According to CompTIA A+ Core 1 220-1201 hardware objectives, ensuring proper thermal management is crucial for system stability and performance.

Liquid cooling provides more efficient heat dissipation than standard air cooling, allowing CPUs and GPUs to maintain optimal performance under heavy load and preventing thermal throttling. This is especially beneficial in gaming, video editing, rendering, or scientific computation workloads.

Why the other options are incorrect:

B. Advanced RISC : Refers to a type of processor architecture optimized for efficiency and specific instruction sets but does not directly address heat or cooling in high-utilization systems.

C. x86 processor : This is a general processor architecture; while important, it does not mitigate heat or improve cooling under heavy CPU/GPU usage.

D. Hardware security module : Focused on cryptographic operations and secure key storage, unrelated to CPU or GPU thermal management.