CompTIA Updated 220-1201 Exam Questions and Answers by israel

Wireless coverage issues at the physical edges of a building are typically caused by weak RF signal strength. The CompTIA A+ study material says the best solution is to add additional wireless access points (APs) or implement a mesh system to extend coverage and eliminate dead zones.

Enabling 5GHz often worsens the issue because 5GHz has shorter range. Wi-Fi 6 NIC upgrades improve performance but do not increase signal reach. Flushing DNS does not affect wireless coverage.

Installing more APs ensures stronger coverage, better signal-to-noise ratio, and stable connectivity aligning with CompTIA’s wireless troubleshooting best practices.

A corporate-provided email client is designed to integrate with enterprise services such as shared mailboxes, MDM policies, and enterprise authentication. CompTIA A+ states that corporate clients support additional management features, secure authentication protocols (such as OAuth or Kerberos), and policy-enforced access control essential for accessing shared or departmental mailboxes.

Open-source clients (Option A) may lack compatibility with enterprise environments. Built-in smartphone clients (Option B) often don’t support complex mailbox structures such as shared mailboxes. Employee-preferred apps (Option D) are discouraged because they may not meet security requirements.

Corporate clients ensure full compatibility with organizational mail servers, shared folders, calendars, and enterprise security features, making corporate email clients the correct choice according to CompTIA’s mobile device email configuration standards.

To locate or identify an unlabeled network connection, the tool most suited for tracing cables through walls, ceilings, or patch panels is a toner probe (also called a tone generator and probe kit). CompTIA A+ describes this tool as essential for cable identification: the technician attaches the tone generator to one end of the network cable, and the probe detects the signal on the other end, even across long distances or through bundled wiring.

This makes the toner probe ideal for environments where cables are unlabeled, routed through structured cabling systems, or mixed with other wires. It allows the technician to listen for the distinctive tone, confirming the cable’s termination point.

A cable tester (C) verifies wiring integrity and pinouts but cannot trace a cable through physical pathways. It is used after identification, not during it. A loopback plug (B) is used for port testing and NIC diagnostics, not cable tracing. A network tap (A) is used for traffic monitoring, security analysis, and packet capture; it does not help locate cables.

Therefore, the toner probe is the correct tool for identifying and tracing an unlabeled network cable, aligning with CompTIA’s recommended cable management and troubleshooting procedures.

PCIe (Peripheral Component Interconnect Express) is required for high-end video cards.

NVMe (Non-Volatile Memory Express) utilizes the M.2 or PCIe interface for the fastest SSD performance.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Motherboard expansion slots and storage interfaces:

“High-end video cards require a PCIe slot, while NVMe drives use M.2 (PCIe) slots for the highest data transfer rates.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Motherboard and Storage

CompTIA Exam Objectives 220-1101, Domain 3.2

============