CompTIA Updated XK0-005 Exam Questions and Answers by henri

The correct sequence of commands to expand a volume group using a new disk is fdisk, pvcreate, vgextend. The fdisk command can be used to create a partition on the new disk with the type 8e (Linux LVM). The pvcreate command can be used to initialize the partition as a physical volume for LVM. The vgextend command can be used to add the physical volume to an existing volume group. The partprobe command can be used to inform the kernel about partition table changes, but it is not necessary in this case. The vgcreate command can be used to create a new volume group, not expand an existing one. The lvextend command can be used to extend a logical volume, not a volume group. The lvcreate command can be used to create a new logical volume, not expand a volume group. The mkfs command can be used to create a filesystem on a partition or a logical volume, not expand a volume group. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Disk Storage, pages 462-463.

The correct command to list all local accounts in which the UID is greater than 500 is:

awk -F: '$3 > 500 {print $1}' /etc/passwd

This command uses awk to process the /etc/passwd file, which contains information about the local users on the system. The -F: option specifies that the fields are separated by colons. The $3 refers to the third field, which is the UID. The condition $3 > 500 filters out the users whose UID is greater than 500. The action {print $1} prints the first field, which is the username.

The other commands are incorrect because:

find /etc/passwd —size +500 will search for files that are larger than 500 blocks in size, not users with UID greater than 500.

cut —d: fl / etc/ passwd > 500 will cut the first field of the /etc/passwd file using colon as the delimiter, but it will not filter by UID or print only the usernames. The > 500 part will redirect the output to a file named 500, not compare with the UID.

sed '/UID/' /etc/passwd < 500 will use sed to edit the /etc/passwd file and replace any line that contains UID with 500, not list the users with UID greater than 500. The < 500 part will redirect the input from a file named 500, not compare with the UID.

To retrieve the scripts from a repository and make them available on a local workstation, the junior Linux administrator can use the command git clone ©. This will create a copy of the repository on the local machine, including all the scripts and history. The other commands will not clone the repository, but either fetch, checkout, or branch from an existing repository. References:

[CompTIA Linux+ Study Guide], Chapter 10: Working with Git, Section: Cloning Repositories with Git

[How to Clone a Git Repository]

The command ip addr add 10.0.6.5/24 dev enp1s0f1 will achieve the goal of temporarily assigning IP address 10.0.6.5/24 to the newly added network interface enp1s0f1. The ip command is a tool for managing network interfaces and routing on Linux systems. The addr option specifies the address manipulation mode. The add option adds a new address to an interface. The 10.0.6.5/24 is the IP address and the subnet mask in CIDR notation. The dev option specifies the device name. The enp1s0f1 is the name of the network interface. The command ip addr add 10.0.6.5/24 dev enp1s0f1 will add the IP address 10.0.6.5/24 to the network interface enp1s0f1, which will allow the administrator to copy data from another VLAN. This is the correct command to use to achieve the goal. The other options are incorrect because they either do not add a new address to an interface (echo "IPV4_ADDRESS=10.0.6.5/24" > /etc/sysconfig/network-scripts/ifcfg-enp1s0f1 or ifconfig 10.0.6.5/24 enp1s0f1) or do not use the correct syntax for the command (nmcli conn add ipv4.address-10.0.6.5/24 ifname enp1s0f1 instead of nmcli conn add type ethernet ipv4.address 10.0.6.5/24 ifname enp1s0f1). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 385.