Huawei Updated H12-821_V1.0 Exam Questions and Answers by kieran

RPF (Reverse Path Forwarding) checks are used to prevent multicast loops. An RPF check uses the unicast routing table (or multicast static routes, if configured) to determine the correct incoming interface for a multicast packet.

Multicast protocols like PIM use the RPF mechanism, and the unicast routing table is the primary reference.

Multicast dynamic routing protocols do not maintain their own separate tables for RPF by default.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“RPF checks are performed using the unicast routing table or multicast static routes. The interface through which the multicast source is reachable is considered valid for RPF.”

(Chapter: Multicast – Section: RPF Principle)

When a stack splits, the MAC addresses of the newly formed stacks do not change immediately. Instead, they retain their original MAC addresses until new ones are reassigned during topology updates. This delayed update prevents immediate conflicts and allows MAD (Multiple Active Detection) to handle any resulting issues ​.

A stateful inspection firewall tracks the state of network connections and only matches the initial packet against its rule set. Subsequent packets in the same connection are matched in the state table. Contrary to this, UDP packets can be inspected by correlating them with connection states, and packets in a single connection are always correlated ​.

Comprehensive and Detailed Step-by-Step Explanation:

ACL Capabilities:

ACLs are versatile tools that can match:

Data packets: Using IP addresses, protocols, ports, etc.

Routes: ACLs can be used in route filtering, matching both IP prefix length and mask length.

Correct Statement:

ACLs can match both the IP address prefix length and mask length in route filtering applications.