USGBC Updated LEED-Green-Associate Exam Questions and Answers by alisha

The best way to prevent a building’s indoor pollutant(s) is to eliminate or control pollutants at the source. Indoor pollutants are substances or particles that can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Indoor pollutants can originate from various sources, such as building materials, furnishings, cleaning products, combustion appliances, outdoor air, or occupant activities. Eliminating or controlling pollutants at the source can prevent them from entering or spreading in the indoor environment, which can reduce the exposure and risk for the occupants. Some examples of source control strategies are: using low-emitting materials, installing local exhaust ventilation, sealing combustion appliances, implementing green cleaning practices, and prohibiting smoking13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Indoor Air Quality3

LEED considers products to be environmentally preferable when they are locally extracted, manufactured, and purchased. This is because local sourcing reduces the environmental impact associated with transportation, supports local economies, and can often ensure that the materials are suitable for the local climate and conditions. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Placing grilles, grates or mats at all major entrances is an example of permanent entryway systems used to reduce dust, dirt and contaminants brought into a facility. Permanent entryway systems are designed to capture dirt and particulates from people’s shoes and prevent them from entering the indoor environment. This improves the indoor air quality and reduces the need for cleaning and maintenance. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “use permanent entryway systems (grilles, grates, mats) to reduce particulate matter being brought into buildings at regular entryways” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Indoor Environmental Quality | U.S. Green Building Council]

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.