USGBC Updated LEED-AP-BD+C Exam Questions and Answers by preston

LEED v5 LTc2: Equitable Development, Option 3: Equitable Construction specifically rewards workforce development for construction workers. One compliance pathway is job-related skills training delivered through a Department of Labor registered apprenticeship program, or an appropriate local equivalent outside the United States. LEED requires at least 15% of total project construction hours to be performed by participants enrolled in qualifying registered apprenticeship programs. This approach strengthens workforce skills, career opportunities, and long-term economic participation while distributing project benefits more equitably. Affordable housing is addressed separately under Option 2: Housing and Jobs Proximity, while engagement with local businesses may support broader community planning but is not the defined Equitable Construction workforce-development pathway. Therefore, Option A directly matches the LEED v5 credit requirement.

================

According to theLEED V5: Building Design + Construction Guide, the owner or an owner’s representative must be a member of the integrated project team for the Integrative Process Prerequisite, Integrative Project Planning and Design.The owner or anowner’s representative is responsible for establishing the project’s vision, goals, budget, and schedule, as well as defining the owner’s project requirements (OPR) and participating in the design charrettes and reviews1.The owner or an owner’s representative alsoplays a key role in ensuring the continuity and alignment of the project’s performance andenvironmental objectives throughout all phases of the project1.

The other choices are not mandatory members of the integrated project team, although they may be involved in the integrative process depending on the project’s scope and needs.The general contractor is typically hired after the design phase and may not be involved in the predesign and schematic design analyses required by the prerequisite1.A LEED AP is a professional who has demonstrated knowledge and experience in applying the LEED rating system, but is not required to be part of the integrated project team, although it is recommended and rewarded by the LEED credit, Integrative Process1.The project’s mechanical engineer is one of the possible design consultants who may contribute to the integrative process, especially for the energy-related systems analysis, but is not required to be part of the integrated project team1.

LEED V5: Building Design + Construction Guide, Integrative Process Prerequisite, Integrative Project Planning and Design, Requirements1

Source control is one of the control measures recommended by the Sheet Metal and Air Conditioning National Contractors Association (SMACNA) for the Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan. Source control means minimizing the generation and emission of indoor air pollutants from the construction activities and materials. Some examples of source control are1:

•Using low-emitting adhesives, sealants, paints, coatings, and flooring systems that comply with the VOC limits of the applicable LEED credit.

•Storing absorptive materials in a protected area and covering them with plastic sheeting to prevent moisture and mold growth.

•Scheduling the installation of finish materials after the completion of wet and dusty work, such as concrete pouring, drywall sanding, and painting.

•Isolating work areas where high levels of contaminants are generated or used, such as welding, cutting, grinding, and solvent cleaning, and providing adequate ventilation and exhaust.

•Prohibiting smoking, eating, and drinking in the work areas, and providing designated areas for these activities.

Light Emitting Diode (LED) is an energy efficient lamp type that is free from mercury. Mercury is a toxic metal that can pose health and environmental risks when released from broken or discarded lamps.LED lamps do not contain mercury or other hazardous substances, and they also have longer lifespans and lower energy consumption than other lamp types12.References:No mercury Lights | LEEDuser;LED Lighting