Pre-Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: get65

Page: 1 / 18

CCNP Data Center Implementing Cisco Application Centric Infrastructure (300-620 DCACI)

Implementing Cisco Application Centric Infrastructure (300-620 DCACI)

Last Update May 16, 2026
Total Questions : 247

To help you prepare for the 300-620 Cisco exam, we are offering free 300-620 Cisco exam questions. All you need to do is sign up, provide your details, and prepare with the free 300-620 practice questions. Once you have done that, you will have access to the entire pool of Implementing Cisco Application Centric Infrastructure (300-620 DCACI) 300-620 test questions which will help you better prepare for the exam. Additionally, you can also find a range of Implementing Cisco Application Centric Infrastructure (300-620 DCACI) resources online to help you better understand the topics covered on the exam, such as Implementing Cisco Application Centric Infrastructure (300-620 DCACI) 300-620 video tutorials, blogs, study guides, and more. Additionally, you can also practice with realistic Cisco 300-620 exam simulations and get feedback on your progress. Finally, you can also share your progress with friends and family and get encouragement and support from them.

Questions 2

In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?

Options:

A.  

Endpoint information is not exchanged across sites unless COOP protocol is used.

B.  

Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.

C.  

Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.

D.  

Endpoint information is exchanged across sites when the endpoints are discovered in both sites.

Discussion 0
Questions 3

A bridge domain for an EPC called “Web Servers” must be created in the Cisco APIC. The configuration must meet these requirements:

    Only traffic to known Mac addresses must be allowed to reduce noice.

    The multicast traffic must be limited to the ports that are participating in multicast routing.

    The endpoints within the bridge domain must be kept in the endpoint table for 20 minultes without any updates.

Which set of steps configures the bridge domain that satisfies the requirements?

Options:

A.  

Select the ARP Flooding checkbox.

Create an Endpoint Retention Policy with a Remote Endpoint Aging Interval of 20 minutes.

Set L3 Unknown Multicast Flooding to Optimized Flooding

B.  

Set L2 Unknown Unicast to Hardware Proxy.

Configure L3 Unknown Multicast Flooding to Optimized Flood.

Create an Endpoint Retention Policy with a Local Endpoint Aging interval of 1200 seconds.

C.  

Switch L2 Unknown Unicast to Flood.

Select the default Endpoint Retention Policy and set the Local Endpoint Aging to 20 minutes.

Set Multicast Destination Flooding to Flood in Encapsulation.

D.  

Multicast Destination Flooding should be set to Flood in B

D.  

Set L3 Unknown Multicast Flooding to Flood.

Select the default Endpoint Retention Policy with a Local Endpoint Aging Interval of 1200 seconds.

Discussion 0
Ace
No problem! I highly recommend Cramkey Dumps to anyone looking to pass their certification exams. They will help you feel confident and prepared on exam day. Good luck!
Harris Apr 16, 2026
That sounds amazing. I'll definitely check them out. Thanks for the recommendation!
Annabel
I recently used them for my exam and I passed it with excellent score. I am impressed.
Amirah Apr 23, 2026
I passed too. The questions I saw in the actual exam were exactly the same as the ones in the Cramkey Dumps. I was able to answer the questions confidently because I had already seen and studied them.
Faye
Yayyyy. I passed my exam. I think all students give these dumps a try.
Emmeline Apr 19, 2026
Definitely! I have no doubt new students will find them to be just as helpful as I did.
Cecilia
Yes, I passed my certification exam using Cramkey Dumps.
Helena Apr 16, 2026
Great. Yes they are really effective
Questions 4

A network engineer configures the Cisco ACI fabric to connect to vCenter with these requirements:

Port groups must be automatically created on the distributed virtual switch.

Port groups must use the VLAN allocation in the range between 20-30.

The deployment must optimize the CAM space on the leaf switches.

Which set of actions meets these criteria?

Options:

A.  

Create a dynamic VLAN pool with the VLAN range of 20-30.

Create a VMM domain and associate it with the VLAN pool.

Create the EPG and associate the domain.

Set the deployment immediacy to On Demand.

B.  

Create a dynamic VLAN pool with the VLAN range of 20-30.

Create a physical domain and associate it with the VLAN pool.

Create the EPG and associate the domain.

Set the deployment immediacy to On Demand.

C.  

Create a static VLAN pool with the VLAN range of 20-30.

Create a physical domain and associate it with the VLAN pool.

Create the EPG and associate the domain.

Set the deployment immediacy to Immediate.

D.  

Create a static VLAN pool with the VLAN range of 20-30.

Create a VMM domain and associate it with the VLAN pool.

Create the EPG and associate the domain.

Set the deployment immediacy to Immediate.

Discussion 0
Questions 5

Which two actions extend a Layer 2 domain beyond the ACI fabric? (Choose two.)

Options:

A.  

extending the routed domain out of the ACI fabric

B.  

creating a single homed Layer 3 Out

C.  

creating an external physical network

D.  

extending the bridge domain out of the ACI fabric

E.  

extending the EPG out of the ACI fabric

Discussion 0
Title
Questions
Posted

300-620
PDF

$40.25  $114.99

300-620 Testing Engine

$47.25  $134.99

300-620 PDF + Testing Engine

$61.25  $174.99