Exin Updated CDCS Exam Questions and Answers by tomos

The Open Compute Project (OCP), initiated by Facebook in 2011, focuses on open designs for servers, storage, racks, and power systems. The goals are:

Reduce energy consumption by using efficient hardware.

Save materials by eliminating unnecessary components.

Lower costs by standardizing and sharing open designs.

Option B is wrong—OCP hardware can be adopted by enterprises as well. Option C is unrelated (OCP is hardware, not OS). Option D is broader cloud adoption, not OCP’s direct mission.

Thus, the primary focus is energy, material, and cost savings through open-source hardware.

Design changes during the implementation phase are generally allowed only when there is a strong business and/or technical justification. Changes at this stage can lead to delays, increased costs, or compromise design integrity. Thus, a rigorous assessment is required to ensure any modifications are essential and provide clear benefits or address critical issues.

Detailed Explanation:

Changes post-design freeze should be minimized to avoid scope creep and additional costs. However, if a technical issue arises that would affect operational goals, or a business need warrants modification, justified changes are permissible, following an impact assessment and approval process.

EPI Data Center Specialist References:

EPI project management guidelines recommend a controlled change management process during implementation, allowing changes only when they align with critical objectives or address unforeseen issues that affect the project's success.

Testing smoke sensors should be conducted according to the vendor specifications to ensure compliance with safety standards and accurate results. Vendors provide specific testing procedures to account for the sensor type, environment, and operational characteristics, ensuring that tests do not damage the equipment or provide false results.

Detailed Explanation:

Smoke sensors can vary by type and sensitivity, so following the vendor's recommended testing procedure ensures the sensors function correctly without risking sensor damage. Injecting smoke or using a self-test might be insufficient or could lead to inaccurate assessments if they do not align with the vendor's testing protocol.

EPI Data Center Specialist References:

EPI recommends adhering to manufacturer specifications for testing critical safety equipment, ensuring that tests reflect real-world conditions without compromising sensor integrity or reliability.

To ensure uniform air distribution, there must be a buffer zone between CRAC/CRAH discharge and the first row of racks. Industry best practice (ASHRAE & TIA-942) specifies at least 1.2 m (4 ft).

Less than 1.2 m risks air velocity hotspots and turbulence, disrupting cold aisle containment.

More than 1.8 m wastes valuable floor space without added benefit.

Thus, 120 cm is the recommended minimum.