RedHat Updated RH302 Exam Questions and Answers by alyssia

The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:

Physical Volume (PV)is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.

Physical Extent (PE)is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.

Logical Extent (LE)is also a chunk of disk space. Every LE is mapped to a specific PE.

Logical Volume (LV)is composed of a group of LEs. You can mount a filesystem such as /home and /var on an LV.

Volume Group (VG)is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.

1.Verify the size of Logical Volume:lvdisplay /dev/vg0/lv1

2.Verify the Size on mounted directory:df –h or df –h mounted directory name

3.Use :lvextend –L+400M /dev/vg0/lv1

4. resize2fs /dev/vg0/lv1to bring extended size online.

5. Again Verify using lvdisplay and df –h command.

Do the following steps as:

1.rpm –ivhftp://server1/example.com/pub/updates/zsh-*

or

1.Login to ftp server : ftpftp://server1.example.comusing anonymous user.

2.Change the directory: cd pub and cd updates

3.Download the package: mget zsh-*

4.Quit from the ftp prompt : bye

5.Install the package

6.rpm -ivh zsh-*

7.Verify either package is installed or not : rpm -q zsh

To understand the role of a boot loader, take a step back from Linux. When you boot your computer, the BIOS starts by detecting basic hardware, including your hard drives. Once it's done, it looks for the boot loader on the Master Boot Record of the first available disk. If you're working with an older PC, the BIOS can't find your boot loader unless it's located within the first 1,024 cylinders of the hard disk.

Newer BIOSes overcome this problem with Logical Block Addressing, which is also known as LBA mode. LBA mode reads 'logical' values for the cylinder, head, and sector, which allows the BIOS to 'see' a larger disk drive.

If you have multiple hard drives, there is one more caveat. If your drives are IDE hard drives, the /boot directory must be on a hard drive attached to the primary IDE controller. If your drives are all SCSI hard drives, the /boot directory must be located on a hard drive with SCSI ID 0 or ID 1. If you have a mix of hard drives, the /boot directory must be located on either the first IDE drive or a SCSI drive with ID 0. In other words, this is not an issue on the Red Hat exams unless the computer that you're tested on has more than two hard drives. And I believe that's less likely, as that would increase the cost of the exam.

If you are getting the Kernel panic error, it means it is boot loader related problem. Redhat Enterprise Linux uses the GRUB boot loader. You can pass the kernel parameter from the boot loader as well as you can correct the kernel parameter passing from boot loader from GRUB screen at boot time.

GRUB boot loader configuration file is: /etc/grub.conf

And Correct Configuration is:

default=0

timeout=5

splashimage=(hd0,0)/grub/splash.xpm.gz

hiddenmenu

title Red Hat Enterprise Linux ES (2.6.9-5.EL)

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Probably miss-configured the boot loader, so giving this problem. You can pass the correct parameter from GRUB prompt:

Table 3-3:GRUB Editing Commands

Command

Description

b

Boot the currently listed operating system

d

Delete the current line

e

Edit the current line

o

Create an empty line underneath the current line

O

Create an empty line above the current line

If you know all parameters and sequence of the boot loader you can enter in command prompt also.

Press c on GRUB screen.

Grub>root (hd0,0)

grub>kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

grub>initrd /initrd-2.6.9-5.EL.img

grub>boot

Do the following steps as:

1. Use fdisk /dev/hdaTo create new partition.

Type nFor New partition

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.

Type t to change the System ID of partition.

Type Partition Number

Type 82 that means Linux Swap.

Press w to write on partitions table.

Either Reboot or use partprobe command.

mkswap /dev/hda?To create Swap File system on partition.

swapon /dev/hda?To enable the Swap space from partition.

free –mVerify Either Swap is enabled or not.

vi /etc/fstab

/dev/hda?swapswapdefaults0 0

Reboot the System and verify that swap is automatically enabled or not.