CWNP Updated CWNA-108 Exam Questions and Answers by ayana

Patch and panel antennas are directional antenna types that are commonly used by indoor Wi-Fi devices in a MIMO multiple spatial stream implementation. These antennas have a flat rectangular shape and can be mounted on walls or ceilings to provide coverage in a specific direction. They have a moderate gain and a relatively wide beamwidth, making them suitable for multipath environments where signals can reflect off different surfaces and create multiple spatial streams. Patch and panel antennas can also support polarization diversity, which means they can transmit and receive both horizontally and vertically polarized waves, increasing the MIMO performance. References: 1, Chapter 2, page 72; 2, Section 2.4

OFDMA is a new modulation scheme introduced in 802.11ax that allows multiple users to share the same channel by dividing it into smaller subchannels called resource units (RUs). This improves the efficiency and capacity of the WLAN by reducing contention and overhead. However, to use OFDMA, both the AP and the client must support 802.11ax and negotiate the parameters of the subchannel allocation. Therefore, the customer needs to upgrade the clients that require OFDMA to 802.11ax devices12.

The other options are not correct because they do not reflect the reality of OFDMA. Option B is incorrect because OFDMA is a mandatory feature of 802.11ax for both downlink and uplink transmissions, and all 802.11ax APs must support it1. Option C is incorrect because OFDM and OFDMA are different modulation schemes, and OFDM does not allow multiple users to share the same channel. Option D is incorrect because 802.11ac devices cannot support OFDMA through driver upgrades, as they lack the hardware and firmware capabilities to do so2.

References: 1: CWNA-108 Official Study Guide, page 144 2: OFDMA

When performing a post-deployment validation survey for voice over Wi-Fi (VoWiFi), an action that must be performed is Application analysis with an active phone call on a VoWiFi handset. Application analysis is a method of testing the performance of a specific application over the WLAN by measuring parameters such as throughput, latency, jitter, packet loss, MOS score, and R-value. Application analysis with an active phone call on a VoWiFi handset can help to evaluate the quality of service (QoS) and user experience of VoWiFi calls over the WLAN. It can also help to identify any issues or bottlenecks that may affect VoWiFi calls such as interference, roaming delays, or insufficient coverage. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-107], page 549; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-106], page 519.