Nutanix Updated NCS-Core Exam Questions and Answers by elian

To manually create a cluster after the nodes have been successfully imaged but the automated cluster creation fails, the correct command to use is:

cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n

This command specifies the -s option to include the IP addresses of the Controller Virtual Machines (CVMs) on the nodes, initiating the manual cluster creation process.

References:

• Nutanix Bible (https://www.nutanixbible.com), particularly the sections on manual cluster operations.
• Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), with detailed instructions on manual cluster commands.

To increase the Redundancy Factor (RF) from 2 to 3, at least five nodes are required for the cluster to function correctly with RF3, as each data block needs to be replicated to three different nodes. However, the optimal solution that offers both the necessary node count and sufficient storage overhead is:

• Six Compute Nodes with 25% available disk space: This configuration ensures that there are enough nodes to support RF3 while maintaining adequate storage capacity for redundancy without overutilization.

References:

• Nutanix Bible (https://www.nutanixbible.com), particularly the sections on redundancy factors and node requirements.
• Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), focusing on cluster scaling and redundancy considerations.

Considering the equipment setup with one Out-of-Band Management (OOBM) Ethernet switch and two 10GbE SFP+ Top of Rack (ToR) switches, the consultant should recommend six DAC (Direct Attach Cable) 10GbE cables and three Ethernet cables. The DAC 10GbE cables are suitable for connecting the nodes to the ToR switches to handle high-speed data transfers, while the Ethernet cables are necessary for connections related to management purposes, such as connecting to the OOBM switch for remote management tasks. This recommendation ensures adequate connectivity for both data and management networks.References: Nutanix Hardware and Installation Guide, Best Practices for Network Cable Management.

In the scenario where SQL queries are running slower post-migration, creating multiple TempDB data files is a recognized best practice for optimizing SQL Server performance, especially when dealing with high transaction rates or complex queries. This approach helps in distributing the I/O load across multiple files and drives, reducing the contention and wait times associated with TempDB, which is a common bottleneck in SQL Server environments. Enabling autogrowth ensures that these files can dynamically grow as needed, which helps in handling unexpected increases in database activity without manual intervention.References: Nutanix Best Practices for SQL Server, SQL Server performance tuning guidelines.