CWNP Updated CWDP-305 Exam Questions and Answers by chaim

Comprehensive and Detailed Explanation:

The 5 GHz band offers more non-overlapping channels and is less susceptible to interference compared to the 2.4 GHz band. By moving corporate data clients and VoWiFi devices to the 5 GHz band, the network can achieve better performance and reduced interference, especially for latency-sensitive applications like voice over Wi-Fi.

Comprehensive and Detailed Explanation:

When transitioning from a centralized to a distributed data forwarding model in a WLAN architecture, it's important to consider the capabilities of the existing APs. Some APs designed specifically for centralized forwarding may lack the necessary hardware or firmware support to operate effectively in a distributed forwarding mode. This can lead to compatibility issues and may require hardware upgrades or replacements to ensure proper functionality in the new architecture.

Each SSID broadcast by an AP adds additional management frame overhead, such as beacon frames. These beacon frames are transmitted periodically by the AP at the lowest mandatory data rate (e.g., 1 or 6 Mbps), which consumes airtime that would otherwise be used for client data.

According to CWDP-305:

“Each SSID increases beacon overhead. More SSIDs lead to greater airtime consumption by management traffic, which in turn decreases available throughput for actual client data traffic.”

Reducing the number of SSIDs is a best practice to minimize management overhead and optimize throughput in the wireless network.

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Infrastructure Design

In environments like museums, aesthetic considerations are paramount. To maintain the visual integrity of exhibits while ensuring robust wireless coverage, APs can be concealed using plastic covers that match the surroundings. These covers are designed to be RF-transparent, ensuring that signal strength and quality are not compromised.

Other options are less suitable:

Locking the AP inside a metal box would severely attenuate the wireless signal due to the shielding effect of metal.

Placing APs between walls and I-beams may obstruct signal propagation and complicate maintenance.

Using outdated technology like 802.11b APs would not meet modern performance standards and could introduce compatibility issues.