CWNP Updated CWDP-305 Exam Questions and Answers by zidan

In WLAN deployments, each SSID is typically mapped to a unique VLAN. This allows logical separation of traffic, enabling different security policies, QoS settings, and routing for different user groups or services.

From CWDP-305:

“Each SSID in a WLAN is usually mapped to a different VLAN on the wired infrastructure. This allows for segregation of traffic, application of different network policies, and enhanced security enforcement.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Infrastructure Design

Band steering is a technique used to encourage dual-band clients to connect to the less congested 5 GHz band.However, some clients may not respond to steering attempts and persist in attempting to connect on the 2.4 GHz band.To ensure connectivity for these persistent clients, APs are designed to eventually respond to their Probe Requests on the 2.4 GHz band after a certain number of ignored attempts.

The CWDP-305 Official Study and Reference Guide states:

"Band steering mechanisms must account for clients that do not support or respond to steering attempts, allowing them to connect on the 2.4 GHz band after a defined number of ignored Probe Requests."

In WLAN operations, two primary scanning methods are employed by client devices to discover available wireless networks:

Active Scanning:The client device actively sends out probe request frames on various channels. Access Points (APs) that receive these requests respond with probe response frames, providing information about the network. This method allows clients to discover networks even if they are not broadcasting their SSIDs.

Passive Scanning:The client device listens for beacon frames that are periodically transmitted by APs. These beacons contain information about the network, such as SSID, supported data rates, and security protocols. Passive scanning is less intrusive and does not generate additional traffic, but it may take longer to discover networks, especially if the beacon interval is lengthy.

Understanding these scanning methods is crucial for network design and troubleshooting, as they impact how quickly and efficiently clients can connect to available networks.

Comprehensive and Detailed Explanation:

Microwave ovens operate at a frequency of approximately 2.45 GHz, which overlaps with the Wi-Fi 2.4 GHz band. During lunchtime, when microwaves are heavily used, they emit electromagnetic interference that disrupts Wi-Fi signals in the same frequency range, causing packet loss, retries, and intermittent connectivity.

“Microwave ovens can cause significant interference in the 2.4 GHz band, particularly when used in close proximity to client devices and APs.”

— CWDP-305 Study Guide, Chapter: Post-Design ValidationandTroubleshooting