Amazon Web Services itexams aws Certified Specialty Ans-c01 Dumps Pdf by Jeremy q0 vce pdf

Page: 21 / 21

Amazon Web Services ANS-C01 Exam Overview :

Exam Name:	Amazon AWS Certified Advanced Networking - Specialty
Exam Code:	ANS-C01 Dumps
Vendor:	Amazon Web Services	Certification:	AWS Certified Specialty
Questions:	290 Q&A's	Shared By:	jeremy

Question 84

An IoT company sells hardware sensor modules that periodically send out temperature, humidity, pressure, and location data through the MQTT messaging protocol. The hardware sensor modules send this data to the company's on-premises MQTT brokers that run on Linux servers behind a load balancer. The hardware sensor modules have been hardcoded with public IP addresses to reach the brokers.

The company is growing and is acquiring customers across the world. The existing solution can no longer scale and is introducing additional latency because of the company's global presence. As a result, the company decides to migrate its entire infrastructure from on premises to the AWS Cloud.The company needs to migrate without reconfiguring the hardware sensor modules that are already deployed across the world. The solution also must minimize latency.

The company migrates the MQTT brokers to run on Amazon EC2 instances.

What should the company do next to meet these requirements?

Options:

Place the EC2 instances behind a Network Load Balancer (NLB). Configure TCP listeners. Use Bring Your Own IP (BYOIP) from the on-premises network with the NLB.

Place the EC2 instances behind a Network Load Balancer (NLB). Configure TCP listeners. Create an AWS Global Accelerator accelerator in front of the NLUse Bring Your Own IP (BYOIP) from the on-premises network with Global Accelerator.

Place the EC2 instances behind an Application Load Balancer (ALB). Configure TCP listeners. Create an AWS Global Accelerator accelerator in front of the ALB. Use Bring Your Own IP (BYOIP) from the on-premises network with Global Accelerator

Place the EC2 instances behind an Amazon CloudFront distribution. Use Bring Your Own IP (BYOIP) from the on-premises network with CloudFront.

Discussion

Question 85

A company has business operations in the United States and in Europe. The company's public applications are running on AWS and use three transit gateways. The transit gateways are located in the us-west-2. us-east-1. and eu-central-1 Regions. All the transit gateways are connected to each other in a full mesh configuration.

The company accidentally removes the route to the eu-central-1 VPCs from the us-west-2 transit gateway route table. The company also accidentally removes the route to the us-west-2 VPCs from the eu-central-1 transit gateway route table.

How can a network engineer identify the misconfiguration with the LEAST operational overhead?

Options:

Use the Route Analyzer feature for AWS Transit Gateway Network Manager

Use the AWSSupport-SetuplPMonitoringFromVPC AWS Systems Manager Automation runbook. Push network telemetry data to Amazon CloudWatch Logs for analysis.

Use VPC flow togs in eu-central-1 and us-west-2 to analyze the missing routes.

Use Amazon VPC Traffic Mirroring in eu-central-1 or us-west-2 to take packet captures and troubleshoot the connectivity issues.

Discussion

Question 86

A customer has set up multiple VPCs for Dev, Test, Prod, and Management. You need to set up AWS Direct Connect to enable data flow from on-premises to each VPC. The customer has monitoring software running in the Management VPC that collects metrics from the instances in all the other VPCs. Due to budget requirements, data transfer charges should be kept at minimum.

Which design should be recommended?

Options:

Create a total of four private VIFs, one for each VPC owned by the customer, and route traffic between VPCs using the Direct Connect link.

Create a private VIF to the Management VPC, and peer this VPC to all other VPCs.

Create a private VIF to the Management VPC, and peer this VPC to all other VPCs, enable source/destination NAT in the Management VPC.

Create a total of four private VIFs, and enable VPC peering between all VPCs.

Discussion

Cody

I used Cramkey Dumps to prepare and a lot of the questions on the exam were exactly what I found in their study materials.

Eric Oct 26, 2025

Really? That's great to hear! I used Cramkey Dumps too and I had the same experience. The questions were almost identical.

Ivan

I tried these dumps for my recent certification exam and I found it pretty helpful.

Elis Oct 11, 2025

Agree!!! The questions in the dumps were quite similar to what came up in the actual exam. It gave me a good idea of the types of questions to expect and helped me revise efficiently.

Laila

They're such a great resource for anyone who wants to improve their exam results. I used these dumps and passed my exam!! Happy customer, always prefer. Yes, same questions as above I know you guys are perfect.

Keira Oct 6, 2025

100% right….And they're so affordable too. It's amazing how much value you get for the price.

Alaia

These Dumps are amazing! I used them to study for my recent exam and I passed with flying colors. The information in the dumps is so valid and up-to-date. Thanks a lot!!!

Zofia Oct 13, 2025

That's great to hear! I've been struggling to find good study material for my exam. I will ty it for sure.

Question 87

A company operates in multiple AWS Regions. The company has deployed transit gateways in each Region. The company uses AWS Organizations to operate multiple AWS accounts in one organization.

The company needs to capture all VPC flow log data when a new VPC is created. The company needs to send flow logs to a specific Amazon S3 bucket.

Which solution will meet these requirements with the LEAST administrative effort?

Options:

Update IAM permissions for each user to include a condition that ensures users cancreate VPCs only when VPC Flow Logs is enabled and configured correctly.

Create a custom AWS Config rule with automatic remediation that verifies VPC Flow Logs is enabled and configured correctly. Apply the AWS Config rule to the organization.

Enable VPC Flow Logs on each transit gateway. Configure VPC Flow Logs to send flow logs to the specified S3 bucket.

Deploy a serverless application that uses AWS CloudTrail to monitor for VPC creation events in each account. Configure the application to apply the correct VPC Flow Logs configuration.