SAVE International Updated VMA Exam Questions and Answers by isha

Value Methodology (VM) is defined by SAVE International in its Value Methodology Standard as “asystematic processthat uses a structured Job Plan to improve the value of projects, products, or processes by analyzing their functions and identifying opportunities to achieve required functions at the lowest total cost without compromising quality or performance.” The term “systematic” emphasizes the methodical, disciplined approach of VM, which follows a defined sequence of phases (the VM Job Plan) and uses specific tools like Function Analysis and cost modeling to ensure consistency and effectiveness.

Option A (Structured process) is partially correct, as VM is structured, but “systematic” is the precise term used by SAVE International to describe the methodology’s comprehensive and methodical nature.

Option B (Specialized process) is incorrect because VM is a general methodology applicable across industries, not limited to a specific domain.

Option C (Systematic process) is correct, directly matching SAVE International’s definition of VM.

Option D (Sequential process) is incorrect because, while the VM Job Plan is sequential, the definition of VM focuses on its systematic nature, not just the sequence.

The Value Methodology (VM) Job Plan is a structured, systematic process central to Value Methodology, as defined in the Value Methodology Fundamentals 1 (VMF 1) course and SAVE International’s Value Methodology Standard. According to these sources, the VM Job Plan consists ofsix phases: Information, Function Analysis, Creative, Evaluation, Development, and Presentation. These phases ensure a disciplined approach to analyzing functions, generating ideas, evaluating alternatives, and presenting value-enhancing recommendations.

Information Phase: Collect and analyze data on project scope, costs, constraints, and objectives to establish a baseline for the study.

Function Analysis Phase: Identify, classify, and analyze functions (e.g., basic, secondary) using tools like the Function Analysis System Technique (FAST) to understand their purpose and relationships.

Creative Phase: Generate a broad range of ideas to improve value through brainstorming or other creative techniques, focusing on alternative ways to perform functions.

Evaluation Phase: Assess the feasibility, cost impact, and benefits of ideas using criteria like performance, quality, and alignment with project goals.

Development Phase: Refine the most promising ideas into detailed, actionable proposals, including implementation plans and cost estimates.

Presentation Phase: Communicate recommendations to stakeholders through reports, presentations, or other deliverables to gain approval and facilitate implementation.

SAVE International’s VMF 1 course, which is a prerequisite for the VMA exam, explicitly teaches these six phases as part of Core Competency #3 (Value Methodology Job Plan). The standard is consistent across SAVE International’s documentation, including the Value Methodology Standard and certification guidelines. Options A (3), C (7), and D (8) do not match the official six-phase structure of the VM Job Plan.

The diagram provided is a Function Analysis System Technique (FAST) diagram, a key tool in Value Methodology’s Function Analysis phase, as taught in the VMF 1 course (Core Competency #2). FAST diagrams map the relationships between functions of a system, with the horizontal axis showing the “how-why” logic (critical path) and the vertical axis showing supporting functions. Functions are classified as basic, secondary, required secondary, or higher-order based on their position and role in the diagram. According to SAVE International’s Value Methodology Standard, “the basic function is the primary purpose of the system, typically found on the critical path; higher-order functions are the reasons why the basic function exists, located to the left of the basic function; secondary functions support the basic function and are often vertical; and required secondary functions are necessary to achieve the basic function.”

In the FAST diagram:

The critical path (horizontal, marked by Y in an earlier question) runs from E to F to G to J to L to M to N to O, representing the main sequence of functions.

Scope lines (B and D) define the study’s boundaries, as identified in Question 15.

Function E is positioned at the far left of the critical path, just inside the left scope line (B).

In FAST diagramming:

Thebasic functionis the primary purpose of the system, typically located near the center or right of the critical path within the scope lines. Here, it would likely be a function like J or L, which is central to the system’s purpose.

Thehigher-order functionis the reason “why” the basic function exists and is located to the left of the basic function, often at or near the left scope line. Function E, being the leftmost function on the critical path, answers “why” the subsequent functions (F, G, etc.) exist, making it the higher-order function.

Secondary functions(e.g., S, T, U, K) are vertical, supporting the critical path, and are not on the main horizontal sequence.

Required secondary functionsare secondary functions essential to the basic function, but E is on the critical path, not a vertical supporting function.

Thus, Function E, as the leftmost function on the critical path, is thehigher-order function, representing the overarching objective or need that the system fulfills.

Option A (Secondary Function) is incorrect because secondary functions are off the critical path (e.g., S, T, K), while E is on the critical path.

Option B (Required Secondary Function) is incorrect because E is not a secondary function; it is on the main path, not a supporting vertical function.

Option C (Basic Function) is incorrect because the basic function is typically more central on the critical path, not at the far left.

Option D (Higher Order Function) is correct, as E’s position at the left of the critical path indicates it is the higher-order function, answering “why” the system exists.

Risk management is a critical aspect of Implementation Planning in Value Methodology (VM), ensuring that VM proposals are feasible and sustainable, as taught in the VMF 1 course (Core Competency #8: Implementation Planning). According to SAVE International’s Value Methodology Standard, risk management in the context of VM follows a standard process aligned with project management best practices, such as those in the Project Management Institute (PMI) framework, which VM adopts for implementation. The correct order of steps in risk management is:

Risk Management Planning: Define how risks will be managed, including methodologies, roles, and tools.

Risk Identification: Identify potential risks that could impact the VM study or its implementation (e.g., cost overruns, delays).

Risk Analysis: Analyze the likelihood and impact of identified risks (qualitative and quantitative analysis).

Risk Response Planning: Develop strategies to mitigate, avoid, transfer, or accept risks.

Risk Monitoring and Control: Monitor risks throughout implementation and control them as needed.

The VMF 1 course emphasizes this sequence in the Development and Presentation Phases, where risks associated with VM proposals are assessed and mitigated to ensure successful implementation. This order ensures a systematic approach, starting with planning, followed by identification and analysis, then response planning, and finally monitoring.

Option A (Risk Management Planning, Risk Analysis, Risk Identification, Risk Response Planning, Risk Monitoring and Control) is incorrect because Risk Identification must precede Risk Analysis— you cannot analyze risks before identifying them.

Option B (Risk Identification, Risk Management Planning, Risk Analysis, Risk Response Planning, Risk Monitoring and Control) is incorrect because Risk Management Planning must come first to establish the framework for the process.

Option C (Risk Management Planning, Risk Identification, Risk Analysis, Risk Response Planning, Risk Monitoring and Control) is correct, as it follows the standard risk management process.

Option D (Risk Management Planning, Risk Identification, Risk Response Planning, Risk Analysis, Risk Monitoring and Control) is incorrect because Risk Analysis must precede Risk Response Planning to inform the response strategies.