RedHat Updated RH202 Exam Questions and Answers by araya

Create the group named training

Answer and Explanation:

• groupadd training

To create a group we use the groupadd command.

Verify from: cat /etc/group whether group added or not?

Raw printer named printerx where x is your station number is installed and shared on server1.example.com. Install the shared printer on your PC to connect shared printer using IPP Protocols. Your server is 192.168.0.254.

Answer and Explanation:

1.Open the Browser either firefox or links

2.Type : http://localhost:631

3.Click on Manage Printer

4.Click on Add Printer

5.Type Queue name like stationx and click on continue

6.Type Device type or printing Protocol: i.e Internet printing Protocol

7.Click on Continue

8.Type Device URL: ipp://server1.example.com/printers/printerx

9.Click on Continue

10.Select RAW Model printer

11.Click on Continue

12.Test by sending the printing job

Create a RAID Device /dev/md0 by creating equal two disks from available free space on your harddisk and mount it on /data.

Answer and Explanation:

Redhat Enterprise Linux 5 Supports the RAID LEVEL 0, RAID LEVEL 1, RAID LEVEL 5 and RAID LEVEL 6 at installation time. You can create it at installation time later no need to type lots of commands for RAID.

At Installation Time:

• uk.co.certification.simulator.questionpool.PList@2459eed0

viii.Click on ok

After Installation: We can create the RAID Device after Installation on command-line.

• Create the Two partitions having equal size. (Specify the Size using Cylinder, find the remaining cylinder and divide by 2).
• Change the Partition ID to fd (Linux raid Autodetect) by typing t.
• Type wTo write on partitions table.
• Use partprobe command to synchronic the partition table.
• Use: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/hda? /dev/hda?
• Verify the RAID: mdadm --detail /dev/md0
• mkfs -t ext3 /dev/md0
• mount /dev/md0 /data
• vi /etc/fstab

/dev/md0/dataext3defaults0 0

• Verify mounting devices using mount command.

Create the group named sysuser.

Answer and Explanation:

1.groupadd sysuser

groupadd command is used to create the group and all group information is stored in /etc/group file.