Huawei Updated H35-580_V2.0 Exam Questions and Answers by samson

A link budget is an accounting of all the power gains and losses that a communication signal experiences in a telecommunication system 8. A link budget can be used to determine the received signal-to-interference-plus-noise ratio (SINR), which is a measure of the quality of the signal at the receiver. The SINR demodulation threshold is the minimum SINR required to demodulate the signal successfully. The SINR demodulation threshold depends on the modulation and coding scheme (MCS) used by the transmitter, which in turn depends on the service rate or data rate required by the application 9. Generally, the higher the service rate, the higher the MCS level, and therefore the higher the SINR demodulation threshold. Thus, statement A is incorrect. The other statements are correct. The interference margin is relatively small on high frequency bands because there are fewer co-channel interferers due to smaller cell sizes 10. The shadow fading margin is related to the edge coverage rate because it accounts for the variation of signal strength due to obstacles in the propagation path 11. The antenna gain of the 64T64R AAU is approximately 24 dBi according to Huawei’s product specifications 12.

According to the HCIA-5G V2.0 Exam Outline, cell unavailability due to system faults (specified using N.Cell.Unavail.Dur.System) is caused by factors such as CPRI link faults, board faults, and faults on an RF module’s TX or RX channels, which correspond to options A, C, and D. Blocking cells by using MML commands is not a system fault, but a manual operation, which corresponds to option B.

According to the Huawei Releases 5G Series Products, Huawei’s AAU5313 and AAU5613 are both RF modules that support 64T64R. The AAU5313 is an ultra-wideband Massive MIMO product that supports both 64T64R and 400 MHz bandwidth on the C-band. The AAU5613 is a BladeAAU Pro product that supports 64T A+P integration on sub-3 GHz bands. The AAU5612 is a BladeAAU product that supports only 32T A+P integration on sub-3 GHz bands. The RRU3939 is not an AAU product but an RRU (Remote Radio Unit) product that supports only 8T8R on sub-3 GHz bands.