| Exam Name: | HCIA-Datacom V2.0 | ||
| Exam Code: | H12-811_V2.0 Dumps | ||
| Vendor: | Huawei | Certification: | HCIA-Datacom |
| Questions: | 138 Q&A's | Shared By: | finnian |
R1 has the following configurations:
[R1] nat address-group test 1
[R1-address-group-test] section 1 100.1.23.1 100.1.23.254
[R1-address-group-test] mode pat
[R1-address-group-test] quit
[R1] nat-policy
[R1-policy-nat] rule name test
[R1-policy-nat-rule-test] source-address range 192.168.0.0 192.168.255.255
[R1-policy-nat-rule-test] action source-nat address-group test
[R1-policy-nat-rule-test] quit
[R1-policy-nat] quit
[R1] interface GE 0/0/2
[R1-GE0/0/2] nat enable
[R1-GE0/0/2] quit
Which of the following statements is false?
After the root bridge is elected on an STP network, which of the following parameters may be compared by ports on non-root bridge nodes to elect the root port? (Select all that apply)
The configuration of an interface on a switch is shown below. When a data frame carrying the VLAN 20 tag is sent out through this interface, how does the switch process the data frame?
port link-type hybrid
port hybrid untagged vlan 10
port hybrid tagged vlan 20
port hybrid pvid vlan 10
On the network shown in the figure, the three PCs belong to VLAN 2. When configuring interface-based VLAN assignment, the administrator only forgets to configure the PVID of GE1/0/1. However, PC1 can still communicate with PC2 at Layer 2.