Huawei Updated H35-211_V2.5 Exam Questions and Answers by asees

In IPTV/multicast access scenarios, channel zapping delay is heavily influenced by how fast the network stops forwarding the previous channel’s stream after a user switches. Huawei documents the IGMP Fast Leave/Prompt Leave feature, which enables the access device to immediately prune the old multicast group on receipt of a Leave (without waiting for group-specific queries and timers), thereby reducing the channel change delay and improving perceived switching speed. Option A explicitly disables a helpful pre-join optimization, which would worsen experience; Option C (preview) concerns showing brief previews and is not a primary mechanism for shortening zapping time; Option D is unrelated to performance. Thus, enabling Quick/Fast Leave is the correct action to shorten switching time.

IPTV over FTTH relies on multicast control; therefore the essential U2000 template is the IGMP template, which defines IGMP behaviors, program authorization binding, and multicast parameters used by the OLT/ONT. MGC applies to voice (VoIP), and SNMP pertains to NMS communication rather than IPTV service logic; value-added templates are not mandatory for basic IPTV.

For IPv4 multicast, the MAC mapping uses 01-00-5E followed by the low-order 23 bits of the multicast IP address. Because an IPv4 multicast address has 28 variable bits (224/4), 5 bits are not mapped to the MAC. Therefore, 2⁵ = 32 distinct multicast IP addresses can map to the same multicast MAC address.

A mismatch between the service-profile’s user-port configuration and the ONT’s actual port capacity does not disable all services. Ports beyond the ONT’s capability remain inactive/unused, while valid ports with correct service bindings continue to work. Service availability depends on the consistency of applied profiles and actual hardware resources, not on a complete shutdown.