Big 11.11 Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: get65

HP Updated HPE7-A03 Exam Questions and Answers by marshall

Page: 5 / 5

HP HPE7-A03 Exam Overview :

Exam Name: HPE Aruba Networking Certified Network Architect - Campus Access
Exam Code: HPE7-A03 Dumps
Vendor: HP Certification: Aruba Certified Professional - Campus Access
Questions: 73 Q&A's Shared By: marshall
Question 20

Which member types require a reboot when doing an In-Service-Software-Upgrade within a VSF stack?

Options:

A.

Standby

B.

Conductor

C.

Member

D.

all member types

Discussion
Question 21

A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.

Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.

The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by single-mode fiber (SMF), of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft), type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, maximum length 60 m (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths 100–150 m (320–500 ft).

For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10 GbE to handle the increased network traffic, and the technical rooms need redundant power.

The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.

The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because the Internet connection is guaranteed.

A week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security of the wired network infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks. For their POS (Point of Sale) systems, they need a low-latency network connection between the POS system and the PCS server in the data center on the ship. Also, the CSO wants to enhance the WLAN security as well by tunneling all user traffic.

What solution fits the customer’s requirements?

Options:

A.

Standardize on 6300 switches for the edge, 3320 for the RR, 8320 for the stub/border, 9240 for the WLAN Gateway, and utilize HPE Aruba Networking Central NetConductor.

B.

Standardize on 6300 switches for the edge, 8320 for the RR, 8360 for the stub/border, 9240 for the WLAN Gateway, and utilize HPE Aruba Networking Central NetConductor.

C.

Standardize on 6300 switches for the edge, 8325 for the RR, 8360 for the stub/border, 9240 for the WLAN Gateway, and utilize HPE Aruba Networking Central NetConductor.

D.

Standardize on 6300 switches for the edge, 8320 for the RR, 8360 for the stub/border, and utilize HPE Aruba Networking Central NetConductor.

E.

Standardize on 6200 switches for the edge, 8325 for the RR, 8360 for the stub/border, and utilize HPE Aruba Networking Central NetConductor.

Discussion
Inaya
Passed the exam. questions are valid. The customer support is top-notch. They were quick to respond to any questions I had and provided me with all the information I needed.
Cillian Oct 9, 2025
That's a big plus. I've used other dump providers in the past and the customer support was often lacking.
Rosalie
I passed. I would like to tell all students that they should definitely give Cramkey Dumps a try.
Maja Oct 23, 2025
That sounds great. I'll definitely check them out. Thanks for the suggestion!
River
Hey, I used Cramkey Dumps to prepare for my recent exam and I passed it.
Lewis Oct 8, 2025
Yeah, I used these dumps too. And I have to say, I was really impressed with the results.
Aryan
Absolutely rocked! They are an excellent investment for anyone who wants to pass the exam on the first try. They save you time and effort by providing a comprehensive overview of the exam content, and they give you a competitive edge by giving you access to the latest information. So, I definitely recommend them to new students.
Jessie Oct 3, 2025
did you use PDF or Engine? Which one is most useful?
Page: 5 / 5

HPE7-A03
PDF

$36.75  $104.99

HPE7-A03 Testing Engine

$43.75  $124.99

HPE7-A03 PDF + Testing Engine

$57.75  $164.99