API Updated API-571 Exam Questions and Answers by dalia

API RP 571 states in the section on Creep Damage:

“Creep damage in carbon steels generally becomes a concern above 700°F (371°C), especially for steels with higher tensile strength (greater than 60 ksi).”

“For prolonged exposure above this temperature, time-dependent deformation can lead to material degradation and cracking, especially at weldments and stress concentrations.”

Thus, the lowest threshold for creep in high-strength carbon steels is 700°F (371°C), making option B correct.

Comprehensive and Detailed Explanation From Exact Extract:

Polythionic acid stress corrosion cracking (PASCC) occurs when sulfide scales on stainless steel surfaces are exposed to oxygen and moisture, most commonly during shutdowns and outages.

Per API RP 571:

Polythionic acids form when iron sulfides react with air and water

Cracking occurs in austenitic stainless steels

Damage is most likely during shutdown, not normal operation

Therefore, PASCC is the damage mechanism directly associated with shutdown exposure conditions.

Referenced Documents (Study Basis):

API RP 571 – Section on Polythionic Acid Stress Corrosion Cracking

======================

Dissimilar Metal Cracking (DMC) is a form of high-temperature cracking that frequently occurs in weld joints between carbon steel and austenitic stainless steel (such as Type 316 SS) due to differences in thermal expansion coefficients and mechanical properties.

From API RP 571 Section 5.2.3.1 (Dissimilar Metal Weld Cracking):

“Cracking frequently occurs in weld joints between ferritic and austenitic materials such as carbon steel to 300 series stainless steels due to thermal expansion mismatch during high temperature operation.”

Therefore, Option D (Carbon steel to 316 stainless steel) is the most susceptible combination and the correct answer.

API RP 578 (Material Verification Program), referenced in API RP 571, specifically calls out sulfidation failures as a major driver for Positive Material Identification (PMI):

“PMI programs are particularly important in services prone to sulfidation where incorrect alloying elements (e.g., carbon steel used in place of low Cr alloy) have led to catastrophic failures.”

“Many failures have occurred when carbon steel was mistakenly installed in place of specified Cr-alloys in sulfidation-prone environments.”

(Reference: API RP 578 and API RP 571, Section 4.2.1.1 – Sulfidation)

Thus, option C is the most appropriate answer.