Juniper Updated JN0-452 Exam Questions and Answers by nolan

Referring to the exhibit and considering that it is in the USA, the WLAN with SSID Eero1234 is not configured to industry best practices while the WLAN with SSID NETGEAR24 is configured to industry best practices.

According to the Initial AP Connection and VLANs & Static IP addresses - Mist document1, when a Juniper Mist AP boots up for the first time, it will expect to see a trunked port or the native VLAN=1 and will send a DHCP request on that VLAN. The AP will attempt to connect to the Mist cloud using port 443, which is the default HTTPS port.

According to the Lecture 3 - Radio Frequency and Antenna Fundamentals - Part 2 document2, an extended service set (ESS) is a group of basic service sets (BSSs) that share a common SSID and are connected by a distribution system (DS). Each BSS within the ESS has its own unique BSSID, which is the MAC address of the AP.

When deploying a Juniper Mist Edge VM (Virtual Machine), the networking architecture is designed to separate different types of traffic to ensure security, scalability, and efficient data handling. Unlike a traditional hardware controller that might use a single trunk port for all traffic, a Mist Edge VM specifically utilizes three primary logical interfaces to function within a data center environment.

The Out-of-Band (OOB) interface (A) is used exclusively for management and control plane traffic. This interface is what connects the Mist Edge to the Mist Cloud via an encrypted tunnel. It is through this port that the Mist Edge receives configuration updates, reports telemetry data to the AI engine, and allows administrators to monitor the health of the VM. By keeping this traffic out-of-band, Juniper ensures that management tasks do not compete with user data throughput.

The Upstream interface (D) is the "northbound" connection. Its primary role is to connect the Mist Edge to the core network or the internet for user data egress. When client traffic is tunneled from the Access Points (APs) to the Mist Edge, the Upstream interface is where that traffic is de-encapsulated and forwarded to the local network resources or the internet gateway. This interface typically connects to a core switch or a DMZ.

The Downstream interface (B) is the "southbound" connection. This is the entry point for the L2TPv3 or Mist Tunnel traffic coming from the Access Points. The APs establish a secure tunnel to this specific interface to transport user data across the Layer 3 network. This separation allows for granular firewall policies and ensures that the tunnel termination point is distinct from the management plane. While the term "Revenue" (E) is often used in carrier-grade routing to describe data-carrying ports, Mist documentation specifically uses the terms Upstream and Downstream to define the data path.