Huawei Updated H12-893_V1.0 Exam Questions and Answers by damian

EVPN (Ethernet VPN) is a control plane technology used with VXLAN in Huawei’s data center networks to provide Layer 2 and Layer 3 connectivity. EVPN routes are advertised using BGP, with different types serving specific purposes. Type 3 routes (Inclusive Multicast Ethernet Tag routes) are used for multicast or BUM (Broadcast, Unknown Unicast, Multicast) traffic handling in VXLAN networks.

MPLS Label Field:In MPLS (Multiprotocol Label Switching), the label field is used to identify the forwarding equivalence class (FEC) or virtual circuit. In EVPN with VXLAN, MPLS labels can be used in underlay networks, but VXLAN itself relies on a VNI (VXLAN Network Identifier) in the VXLAN header for overlay segmentation.

Layer 3 VNI:A Layer 3 VNI is associated with inter-subnet routing in EVPN, typically carried in Type 5 routes (IP Prefix routes) for Layer 3 forwarding. Type 3 routes, however, focus on multicast distribution and carry a Layer 2 VNI or multicast group information, not a Layer 3 VNI.

MPLS Label in Type 3 Routes:The MPLS label in Type 3 routes, if used, identifies the VXLAN tunnel or multicast group, not a Layer 3 VNI. The Layer 3 VNI is specific to Type 5 routes for routing between subnets, not Type 3’s multicast focus.

Thus, the statement isFALSE (B)because the MPLS Label field in EVPN Type 3 routes does not carry a Layer 3 VNI; it relates to Layer 2 multicast or tunnel identification.References:Huawei HCIP-Data Center Network Training – EVPN and VXLAN; CloudFabric EVPN Configuration Guide.

In Huawei’s CloudFabric Solution,SecoManager(Security Manager) andiMaster NCE-Fabric(Network Controller) are components of the SDN ecosystem. SecoManager handles security policy management, while iMaster NCE-Fabric manages network orchestration.

Deployment:These components can be deployed independently but are designed to integrate seamlessly. Huawei’s architecture supports automated interconnection after installation, leveraging northbound/southbound APIs or pre-configured integration workflows.

Interconnection:Manual interconnection is not required post-installation; the system automates the process once both are deployed and configured within the same management domain (e.g., via IP addressing and authentication).

The statement isFALSE (B)because interconnection is automated, not manual.References:Huawei CloudFabric Data Center Network Solution – Component Integration; HCIP-Data Center Network Training – SDN Deployment.

Centralized gateway deployment using BGP EVPN in Huawei’s data center networks (e.g., CloudFabric) involves a gateway handling Layer 3 routing for VXLAN overlays. Let’s evaluate each statement:

A. When configuring a VTEP, you need to create a Layer 2 BD and bind a VNI to the Layer 2 BD:A Bridge Domain (BD) is a Layer 2 broadcast domain in VXLAN, and a Virtual Network Identifier (VNI) is bound to it to segment traffic. This is a standard step when configuring a VXLAN Tunnel Endpoint (VTEP) to map the overlay network.TRUE.

B. A VXLAN tunnel is identified by a pair of VTEP IP addresses and can be established if the local and remote VTEP IP addresses are reachable to each other at Layer 3:VXLAN tunnels are established between VTEPs using their IP addresses as endpoints. Layer 3 reachability (e.g., via underlay routing) is required for tunnel establishment.TRUE.

C. When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNI and VTEP IP address information. A VXLAN tunnel is then dynamically established between them:In BGP EVPN, VTEPs establish a BGP peer relationship, exchange routes (e.g., Type 2 for MAC/IP or Type 3 for multicast), and share VNI and VTEP IP details, enabling dynamic tunnel setup.TRUE.

D. When configuring a VTEP, you need to create an EVPN Instance in the Layer 2 BDand configure an RD for the local EVPN instance. You do not need to configure an RT:An EVPN Instance (EVI) is created within a BD, and a Route Distinguisher (RD) is configured to make routes unique. However, Route Targets (RTs) are also required to control route import/export between EVPN peers, ensuring proper VNI and route distribution. Stating that RT configuration is not needed is incorrect, as RTs are essential for BGP EVPN operation.FALSE.

Thus,Dis the false statement because RT configuration is necessary in centralized gateway deployment with BGP EVPN.References:Huawei CloudFabric Data Center Network Solution – BGP EVPN Configuration; HCIP-Data Center Network Training – EVPN Gateway Deployment.

iMaster NCE-FabricInsight is Huawei’s network assurance and analytics tool, integrated with CloudFabric, that uses telemetry to monitor network health. The health function identifies various issues. Let’s evaluate each option:

A. Switch ARP entry threshold exceeded:This is true. FabricInsight monitors ARP table usage and can detect when the threshold is exceeded, indicating potential resource issues.TRUE.

B. OSPF router ID conflict:This is true. FabricInsight can detect OSPF router ID conflicts, which cause routing instability, through health checks on control plane data.TRUE.

C. Switch CPU usage threshold exceeded:This is true. FabricInsight tracks device performance metrics, including CPU usage, and flags thresholds to prevent performance degradation.TRUE.

D. Routing loop on the network:This is true. FabricInsight analyzes traffic patterns and routing tables to identify loops, leveraging telemetry data for network-wide healthassessment.TRUE.

All optionsA, B, C, and Dcan be identified by the health function of iMaster NCE-FabricInsight.References:Huawei CloudFabric Data Center Network Solution – FabricInsight Features; HCIP-Data Center Network Training – Network Health Monitoring.