Huawei Updated H19-301_V3.0 Exam Questions and Answers by oliwier

MACsec (Media Access Control Security) is a Layer 2 encryption protocol that ensures secure communication between devices in a network. It provides data confidentiality, integrity, and replay protection at the Ethernet layer.

The following models in the Huawei CloudEngine S6730 series support MACsec:

S6730-H48X6C : This switch supports MACsec on its high-speed ports, ensuring secure communication for critical applications.

S6730-H24X6C : Similar to the H48X6C, this model also supports MACsec, making it suitable for environments requiring robust security.

S6730-H24X4Y4C : This model also includes MACsec support, providing advanced security features for enterprise networks.

However, the S6730-S24X6Q does not support MACsec. It is designed for scenarios where Layer 2 encryption is not a primary requirement.

Thus, the correct answers are A , B , and D .

References:

Huawei CloudEngine S6730 Series Switch Product Documentation, HCSA-Presales-IP Network Documentation.

In Huawei's SD-WAN solution, the Route Reflector (RR) plays a critical role in distributing routing information across the network. However, the RR does not directly participate in service traffic forwarding. Its primary function is to facilitate efficient route exchange between SD-WAN nodes.

If the RR fails, it may temporarily disrupt the distribution of routing updates, but it will not interrupt service traffic on the entire network. Service traffic continues to flow through established paths until the RR is restored or redundancy mechanisms take effect.

To ensure high availability, the RR is often deployed in redundancy mode, but the claim that its failure will interrupt all service traffic is FALSE .

References:

Huawei SD-WAN Solution Architecture, HCSA-Presales-IP Network Documentation.

Huawei USG firewalls offer flexible management options to meet diverse operational needs. Below is an analysis of each option:

SecoManager : USG firewalls can be managed centrally through SecoManager, which provides unified security policy orchestration and monitoring.

Commands : Administrators can use CLI (Command-Line Interface) commands to configure and manage the firewall directly.

CloudWAN : This is not a management mode for USG firewalls. CloudWAN is a solution for wide-area network management and is unrelated to firewall O&M.

Web NMS : USG firewalls support web-based Network Management Systems (NMS) for graphical configuration and monitoring.

Thus, the correct answers are A , B , and D .

References:

Huawei USG Firewall Management Guide, HCSA-Presales-IP Network Documentation.

iMaster NCE (Huawei’s Network Cloud Engine)is anintent-driven network management and control systemdesigned forSDN networks.

It supports both traditional and SDN-capable networks:

SNMPis used to manage and controltraditional (non-SDN) devices.

NETCONF + YANGis used to manageSDN-capable devicesin a structured and automated manner.

CLI is not a preferred method in SDN environmentsas it lacks automation and scalability.

????Reference:HCSA-Presales-IP Network Official Documentation – iMaster NCE Management Capabilities