Huawei Updated H19-301_V3.0 Exam Questions and Answers by klara

Factors Affecting Wireless Rate:

The wireless rate (throughput) of a Wi-Fi AP depends on multiple factors, including hardware capabilities, environmental conditions, and configuration settings.

Explanation of Each Factor:

CPU performance:The AP's CPU processes data packets and performs tasks like encryption/decryption. Higher CPU performance enables better throughput.

SNR (Signal-to-Noise Ratio):A higher SNR indicates a stronger signal relative to noise, resulting in better data rates.

Spatial stream:Wi-Fi 6 supports multiple spatial streams (MIMO), increasing throughput by transmitting multiple data streams simultaneously.

Frequency bandwidth:Wider channels (e.g., 20 MHz, 40 MHz, 80 MHz, or 160 MHz) allow higher data rates but may increase interference in crowded environments.

Conclusion:All four options are factors that affect the wireless rate of a Wi-Fi AP.

References:

HCSA-Presales-IP Network V3.0 Training Material, Chapter 8: WLAN Solutions.

Huawei AirEngine Product Documentation.

Overview of Huawei's Wireless Backhaul Solution:

Huawei's wireless backhaul solution for rail transportation ensures reliable communication for train control systems, passenger services, and other applications.

Analysis of Each Statement:

Option A:The handover delay in Huawei's solution can indeed be as low as30 ms, ensuring seamless connectivity during train movement.

Option B:The solution supportshighly reliable active-active links, providing redundancy and fault tolerance.

Option C:The solution is designed to carry critical systems liketrain control signals, ensuring safety and efficiency.

Option D:This is incorrect because Huawei's solution supports backhaul even at speeds of160 km/h or higher, making it suitable for high-speed rail networks.

Conclusion:The correct statements are Options A, B, and C.

References:

HCSA-Presales-IP Network V3.0 Training Material, Chapter 10: Rail Transportation Solutions.

Huawei Rail Transportation Solution Brochure.

The transition to all-Ethernet data center networks is driven by several IT transformations. Below is an analysis of each option:

PCIe is replaced : PCIe is a local bus standard used for high-speed device connections within servers. Its replacement does not directly contribute to the shift toward all-Ethernet networks.

Storage media evolves from HDDs to SSDs : The adoption of SSDs increases storage performance and reduces latency, making Ethernet-based storage protocols like NVMe over Fabrics (NVMe-oF) viable alternatives to traditional Fibre Channel.

The IT architecture evolves from centralized to distributed : Distributed architectures require scalable and flexible networking solutions, which Ethernet-based networks are well-suited to provide.

The deployment mode evolves from single-cloud mode to multiple deployment modes such as multi-cloud mode : While multi-cloud deployments influence network design, they do not directly drive the shift to all-Ethernet networks.

Thus, the correct answers are B and C .

References:

Huawei All-Ethernet Data Center Network Solution Overview, HCSA-Presales-IP Network Documentation.

While Huawei is a major contributor to the development of Wi-Fi standards and actively participates in IEEE 802.11 working groups, it does not serve as the chair of the802.11ax Working Group. The 802.11ax standard, also known as Wi-Fi 6, was developed under the leadership of the IEEE 802.11 working group, with contributions from multiple vendors and organizations.Huawei has played a significant role in advancing Wi-Fi technologies, but the claim that it chairs the 802.11ax Working Group is incorrect.

References:

HCSA-Presales-IP Network Study Guide, Section: "Wi-Fi Standards and IEEE Contributions."

IEEE 802.11ax Standard Documentation, Working Group Leadership.