Huawei Updated H13-624_V5.5 Exam Questions and Answers by kobi

Changing the management network port IP in Huawei flash storage systems is a common initialization task. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* states:

- Option A: False. “The CLI command to change the management IP is ‘change system management_ip_address,’ not ‘change system management_ip.’”

- Option B: True. “Management and maintenance network ports must use different network segments to avoid routing conflicts.”

- _Index C: False. “No license is required to change the management network port IP address; it is a basic configuration task.”

- Option D: True. “For serial port login, the maintenance terminal’s IP and the default management IP must be in the same segment to establish connectivity.”

Thus, options A and C are false.

Fibre Channel (FC) link exceptions in Huawei OceanStor Dorado 18000 systems are addressed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “Common causes of FC link exceptions include mismatched port rates between the host and switch, poorly connected or faulty optical fibers, and mismatched optical module rates between host and storage front-end ports.” Let’s evaluate:

- Option A: Correct. Mismatched FC port rates between the host and switch cause link failures.

- Option B: Correct. Faulty or loose optical fibers disrupt FC connectivity.

- Option C: Correct. Mismatched optical module rates between host and storage ports lead to link exceptions.

- Option D: Incorrect. IP address settings are relevant to iSCSI, not FC, which uses physical connections.

Thus, options A, B, and C are possible causes.

Configuring iSCSI block services on Huawei scale-out storage, like OceanStor Pacific, involves specific steps. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To enable iSCSI block services, the engineer must create a block storage pool to allocate storage resources and configure the iSCSI service to set up initiator-target relationships and network parameters.” Let’s evaluate:

- Option A: Required. A block storage pool is necessary to provide the capacity for iSCSI LUNs.

- Option B: Required. Configuring the iSCSI service is essential to enable the protocol and connectivity.

- Option C: Not required. DPC is used for file services, not iSCSI block services.

- Option D: Not required. DPC installation is unrelated to iSCSI configuration.

Thus, options A and B are mandatory.

The OceanStor Pacific series employs data reconstruction to recover from node or disk failures. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* states: “In OceanStor Pacific, data reconstruction for a faulty disk or node begins automatically based on system policies, but the default delay is not fixed at 15 minutes. The reconstruction start time depends on configurable parameters, such as the system’s fault detection and stabilization period, typically ranging from immediate to several minutes, adjusted via DeviceManager.” The specific claim of a 15-minute delay is not mentioned in the official documentation, and reconstruction timing is flexible, making the statement false.