Huawei Updated H13-624_V5.5 Exam Questions and Answers by darla

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* outlines troubleshooting principles: “Basic troubleshooting principles include prioritizing high-severity alarms, analyzing external factors (e.g., network or host issues) before internal storage issues, and addressing network alarms before network element (NE) alarms to rule out connectivity issues.” Let’s evaluate:

- Option A: Correct principle. Network alarms are analyzed first to exclude external connectivity issues.

- Option B: Not a principle. The material does not prioritize general alarms over specific ones; it focuses on severity and context.

- Option C: Correct principle. Higher-severity alarms are addressed first to mitigate critical issues.

- Option D: Correct principle. External factors are checked before internal storage issues.

Thus, option B is not a basic troubleshooting principle.

Fibre Channel (FC) link exceptions in Huawei OceanStor Dorado 18000 systems are addressed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “Common causes of FC link exceptions include mismatched port rates between the host and switch, poorly connected or faulty optical fibers, and mismatched optical module rates between host and storage front-end ports.” Let’s evaluate:

- Option A: Correct. Mismatched FC port rates between the host and switch cause link failures.

- Option B: Correct. Faulty or loose optical fibers disrupt FC connectivity.

- Option C: Correct. Mismatched optical module rates between host and storage ports lead to link exceptions.

- Option D: Incorrect. IP address settings are relevant to iSCSI, not FC, which uses physical connections.

Thus, options A, B, and C are possible causes.

The Distributed Parallel Client (DPC) in Huawei OceanStor Pacific systems enables parallel file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “When adding DPC nodes, engineers can manually add nodes using DeviceManager by entering the management IP address of the node, not the service IP address. The management IP is used to establish control plane communication for node integration.” The service IP address is used for data access by clients, not for node creation or management tasks. Therefore, the statement that the engineer can add a node using the service IP address is false.

The OceanStor Pacific parallel file system service is designed for high-performance file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “The parallel file system aggregates small I/Os in cache to optimize latency and small file utilization. Large I/Os are forwarded to the home node, bypassing scale-out locks to reduce latency. Large I/Os use passthrough mode for direct disk writes, enhancing bandwidth. The system uses dynamic indexing, not fixed-length large-granularity indexes, to adapt to varying I/O patterns.” Let’s evaluate:

- Option A: True. The material confirms small I/O aggregation in cache for better latency.

- Option B: False. The system uses dynamic, not fixed-length, indexing, making this statement incorrect.

- Option C: True. Direct forwarding to the home node reduces lock overhead and latency.

- Option D: True. Passthrough mode for large I/Os improves bandwidth, as per the material.

Thus, option B is false.