Checkpoint Updated 156-315.82 Exam Questions and Answers by gurbaaz

The correct answer isA. IKEv1 Aggressive Mode performs Phase 1 negotiation usingthree packets. Check Point documentation explains that Main Mode and Aggressive Mode are IKEv1 Phase 1 modes. If Aggressive Mode is not selected, the Security Gateway uses Main Mode by default, which performs IKE negotiation with six packets. Aggressive Mode reduces this to three packets, making it faster but less protected than Main Mode. Option B is wrong because four messages is associated with the normal IKEv2 initial exchange, not IKEv1 Aggressive Mode. Option C is not a valid count for the standard aggressive exchange. Option D is the count for IKEv1 Main Mode, not Aggressive Mode. The CCSE memory rule is direct and should not be overcomplicated:IKEv1 Main Mode = 6 packets; IKEv1 Aggressive Mode = 3 packets; IKEv2 initial exchange = 4 messages. Reference topic:IPsec and IKE / Phase I Modes.

========

The correct answer isC. SmartEvent/SmartView views and reports can be exported asPDForCSV. The R82 Logging and Monitoring Administration Guide states that the Export to PDF and Export to CSV options save the current view or report according to the defined filters and time frame. PDF is used when the administrator needs a formatted report suitable for sharing or archiving, while CSV is used when the underlying report data must be analyzed further in spreadsheet or analytics tools. Option A is wrong because XLS and DOC are not the stated export formats. Option B incorrectly includes DOC. Option D incorrectly includes TXT. The correct operational answer is intentionally narrow:PDF and CSV only. In exam terms, do not assume that because a report can be visually presented or copied into other tools it has native DOC, XLS, or TXT export. Reference topic:Logging and Monitoring Administration / Exporting Views and Reports.

The correct answer isD. The command must use the R82 Management Server Migration Tool from the $FWDIR/scripts directory and must specify the target version asR82. The correct syntax is:

$FWDIR/scripts/migrate_server print_installed_tools -v R82

Option A is wrong because print_tools is not the correct operation name and the version is wrong. Option B is wrong because the tool path is $FWDIR/scripts, not $CPDIR/scripts, and it specifies R81.20 instead of R82. Option C uses the right operation name but the wrong version; R77.30 is not the target release in this scenario. Since Alice is importing an exportedR82Management Database, the installed migration tools must be verified forR82. Check Point’s R82 Installation and CLI guidance uses the migrate_server tool for R80.20-and-higher management migration workflows.

The correct answer isD. Each ElasticXL Cluster Member requires at leastfour interfaces. Check Point’s R82 ElasticXL documentation states that an ElasticXL Cluster requires at least four interfaces on each member: a dedicated management interface, a dedicated Sync interface, an external interface, and an internal interface. The Mgmt port is selected automatically for the management interface, and the Sync port is selected automatically for the synchronization interface. The administrator selects and configures the external and internal data interfaces. Option A and Option B overstate the requirement. Option C is wrong because three interfaces would not satisfy the documented minimum: management, synchronization, external, and internal are all required as separate functional interface roles. This is not a design preference; it is an ElasticXL requirement. For CCSE R82, the answer is straightforward:minimum four interfaces per ElasticXL Cluster Member. Reference topic:ElasticXL Important Notes / Minimum interface requirement.

========