Checkpoint Updated 156-315.82 Exam Questions and Answers by georgie

The correct answer isA. IKEv2 establishes the initial tunnel state using two main exchanges:IKE_SA_INITandIKE_AUTH. Each exchange is a request/response pair, so the normal initial exchange uses four messages/packets total. RFC 7296, the IKEv2 specification, states that implementations must support the four-message IKE_SA_INIT and IKE_AUTH exchanges that establish two SAs: one for IKE and one for ESP or AH. This fits Check Point’s IKEv2 behavior because IKEv2 is selected as the VPN community encryption negotiation protocol, while the actual negotiation sequence follows the standard IKEv2 protocol. Option B incorrectly describes the older IKEv1 Main Mode plus Quick Mode style count often remembered as a larger exchange. Option C invents a legacy-peer exception. Option D wrongly assigns four packets to SA_INIT alone. The CCSE distinction is:IKEv1 Main Mode = 6 packets; IKEv2 initial exchange = 4 packets total. Reference topic:IKEv2 Initial Exchanges / IKE_SA_INIT and IKE_AUTH.

The correct answer isD. The Check Point Compliance Blade usesContinuous Compliance Monitoring, or CCM, to examine Security Gateways, Software Blades, policies, and configuration settings against regulatory standards and Check Point-defined security best practices. Its purpose is not merely to display compliance; it identifies deficiencies and suggests corrective measures. Option A is too narrow because the Compliance Blade is not limited to Management Server configuration. Option B is wrong because CCM means Continuous Compliance Monitoring, not Check Point Compatibility Mode. Option C is wrong because Compliance Blade is not a PostgreSQL database-integrity checker. In a CCSE monitoring context, Compliance Blade complements SmartEvent: SmartEvent correlates logs and security events, while Compliance Blade continuously checks whether the managed environment aligns with security best practices and applicable compliance standards. The key phrase to memorize isContinuous Compliance Monitoring of Security Gateways, Software Blades, policies, and configuration settings. Reference topic:Compliance Blade / Continuous Compliance Monitoring.

========

The correct answer isD. In Check Point R82, an external Network Feed object represents feed data hosted on an external HTTP or HTTPS server. The Security Gateway fetches, parses, and automatically updates the feed object according to changes on the external source server. The feed can contain IP addresses, IP ranges, domains, or both, and it can be used in Access Control, HTTPS Inspection, and NAT policy as a source or destination. Option A describes behavior closer to dynamic objects, not Network Feeds. Option B is directionally close, but the most technically precise point is that theSecurity Gateway fetches the external feedand updates enforcement automatically. Option C describes Check PointUpdatable Objects, where service-related IP ranges are maintained by Check Point cloud services, not customer-hosted Network Feeds. The operational benefit of Network Feeds is reduced manual maintenance and fewer policy installations because updates are fetched automatically by the gateways. Reference topic:External Network Feeds.

========