Nokia Updated 4A0-205 Exam Questions and Answers by diya

No, it is not possible to mix PSS-24x and PSS-8x shelves in an SWDM (Short Wavelength Division Multiplexing) configuration. The two shelves are not compatible, and cannot be used within the same node.

Tracking the protection path for a specific wavelength. The Wavelength Tracker tool is used to track the protection path of a specific wavelength, allowing the user to quickly identify any issues that may arise and take corrective action.

Wavelength Tracker tool is a feature used to monitor and track the protection path for a specific wavelength in an optical network. It can also be used to monitor and verify the working state of the protection path, and to detect and troubleshoot protection switch events. The Wavelength Tracker tool can be used to monitor the protection path for a specific wavelength, and it can also be used to trace the end-to-end path of a wavelength through the network. This tool is typically used by network operators to monitor and troubleshoot wavelength-level issues in the network, such as protection switch events or wavelength-level performance issues.

It can be implemented through the use of a Y-cable or an optical protection switch (OPS) card, which allows for the switching of traffic to a secondary path in the event of a failure on the primary path. This type of protection is commonly used to protect against fiber cuts and other types of physical layer failures in the optical transport network.

Yes, during the segment creation phase or editing. It is possible to select the fiber type independently for each segment while designing a network in EPT. This can be done during the segment creation phase or when editing an existing segment. This allows for more flexibility when designing the network and allows for more efficient use of resources.