Netapp Updated NS0-185 Exam Questions and Answers by ivaan

The customer’s environment uses aCisco MDSSAN fabric, so a Cisco-focused management/visibility tool is the most direct way to gain insight into the fabric’s configuration, health, zoning state, and operational status.Cisco Data Center Network Manager (DCNM)is a Cisco tool designed for managing Cisco SAN (including MDS) and therefore is the correct selection for Cisco fabric configuration insight.

From a NetApp installation and assessment perspective, the second tool that provides valuable insight—especially in the context of deploying NetApp storage into an existing fabric—isActive IQ Config Advisor. Config Advisor is used to validate installation-related configuration and cabling and to detect configuration issues across the environment, including SAN connectivity/cabling checks from the NetApp side. While it is not a Cisco fabric manager, it is the NetApp tool used during installation and verification phases to identify configuration and connection problems that affect successful deployment into a SAN environment (for example, incorrect connectivity patterns or misconfigurations that would impact host/storage access).

Option A (Brocade SAN Health) is purpose-built for Brocade environments and does not match “Cisco MDS fabric configuration.” Option C (Active IQ) focuses on NetApp system health, telemetry, and risks for NetApp arrays rather than providing direct insight into a Cisco MDS fabric configuration.

Therefore, the two tools that best satisfy “insight into their existing Cisco MDS fabric configuration” in the context of deploying NetApp SAN storage areB. Cisco DCNM(Cisco-side fabric visibility) andD. Active IQ Config Advisor(NetApp-side installation validation and connectivity/configuration checks relevant to the fabric integration).

After a support case has been created, NetApp’s support workflow requires thatcase visibility and status trackingbe performed through the NetApp Support site using thecustomer’s credentials, not partner credentials. Customer credentials ensure proper access to systems registered under the customer’s support account, including entitlement visibility, serial numbers, and case ownership. Partner credentials may not have permission to view customer-owned cases unless explicitly granted.

Once logged in, theMy Casessection of the support site provides a centralized dashboard showing all active and historical cases associated with the customer’s company. From this view, cases are listed with details such as case number, product, symptom, status, and last updated timestamp. Selecting the specific case number (in this scenario,41747189) opens the detailed case view, where the customer can monitor progress, read engineer updates, upload logs, and add comments.

The option “Create a Case” is used only when opening anewcase and does not allow viewing the status of an existing case. Therefore, it does not satisfy the requirement. Using partner credentials is also incorrect because case tracking is intended to be performed by the customer organization that owns the system and support entitlement.

Thus, the correct steps are tolog in using customer credentialsandopen My Cases and select the existing case number.

iSCSI usesIQNs (iSCSI Qualified Names)to identify initiators. When mapping LUNs for iSCSI access, ONTAP requires the initiator IQNs to create igroups and establish access control. WWNNs and WWPNs are used for Fibre Channel, not iSCSI.

Therefore, IQNs are required.