Netapp Updated NS0-077 Exam Questions and Answers by camilla

When an existing StorageGRID deployment is expanded with nodes whose Grid Network IP addresses are on a subnet that has not previously been used, that subnet must be added to the Grid Network subnet list before the expansion is started. StorageGRID maintains this list so that every grid node can correctly route internal Grid Network traffic to the other participating subnets. NetApp StorageGRID 12.0 documentation explicitly states that if any new node uses a new Grid Network subnet, the administrator must add that subnet first; otherwise, the expansion must be cancelled, the subnet added, and the expansion restarted.

The configuration is performed in Grid Manager → Maintenance → Network → Grid Network, where the administrator selects Add another subnet and enters the network in CIDR notation. StorageGRID then distributes the routing configuration throughout the grid.

Option A is incorrect because routes do not need to be configured manually on every node. Option B is incorrect because a StorageGRID Gateway Node provides client load-balancing functions and is not an IP router between Grid Network subnets. Option D is also incorrect; StorageGRID explicitly supports multiple Grid Network subnets, provided they are routable through the configured Grid Network gateway.

Reference topics: StorageGRID Expansion → Grid Network → Grid Network Subnet List → Adding Nodes on New Subnets → Grid Network Routing

For a capacity-focused FabricPool repository containing predominantly cold object data, the most efficient expansion method is to add a data-only Storage Node. StorageGRID 12.0 supports combined, metadata-only, and data-only Storage Nodes. A data-only node is dedicated to object-data storage and does not participate in Cassandra metadata storage, making it particularly appropriate when the primary objective is to maximize usable object capacity rather than increase metadata capacity. NetApp specifically describes data-only, high-capacity Storage Nodes as appropriate when dedicated capacity is required.

After the node is added, erasure-coded data can be rebalanced so that existing EC fragments are redistributed across the original and newly added Storage Nodes. NetApp states that EC rebalancing redistributes erasure-coded fragments among Storage Nodes at the site, allowing newly added capacity to be utilized by an existing EC protection scheme.

Option D adds usable capacity, but a combined node also provides metadata/Cassandra functionality that is unnecessary when the goal is specifically to maximize object-data capacity for a cold FabricPool workload. Options B and C are not supported StorageGRID capacity-expansion strategies; appliance RAID/DDP configuration and SANtricity LUN sizing must not be arbitrarily changed to enlarge StorageGRID object storage.

Reference topics: StorageGRID Expansion → Data-only Storage Nodes → Object Capacity → Erasure Coding → EC Rebalancing → FabricPool Capacity Planning

StorageGRID requires an ADC service quorum at each site at all times. The ADC service maintains grid topology information and provides configuration services used throughout the grid. StorageGRID therefore prevents the decommissioning of a Storage Node if removing that node would violate the site's ADC quorum requirements.

StorageGRID 12.0 provides a supported Move ADC procedure specifically for situations where an administrator needs to decommission a Storage Node hosting ADC. The ADC service can be moved to another eligible Storage Node within the same site. The target must not already host ADC and must be either a combined Storage Node or metadata-only Storage Node. NetApp performs the operation through the Grid Management private API, using POST /private/move-adc/start; progress can be monitored with GET /private/move-adc. The dependent IDNT, ACCT, and RSM services move automatically with ADC.

Option B is invalid because ADC runs on eligible Storage Nodes, not Admin Nodes. Option C is incorrect because StorageGRID 12.0 documents the migration through the Grid Management API rather than a CLI relocation command. Option D is unsupported; administrators do not manually reinstall ADC.

Therefore, A is correct.

Reference topics: StorageGRID Maintenance → Move ADC → ADC Quorum → Storage Node Decommission → Grid Management API