International Code Council Updated Fire-Inspector-II Exam Questions and Answers by cruz

According to the 2021 International Fire Code (IFC) and the International Building Code (IBC) Section 1014.3, handrails are categorized into Type I and Type II based on their shape and size requirements.

Type I handrails refer to those that are not circular in shape but still comply with graspability requirements.

IBC Section 1014.3.1 states that:

If a handrail is not circular, it must have a perimeter dimension between 4 inches (minimum) and 6.25 inches (maximum).

The cross-section of such a handrail should provide an adequate grasping surface.

✅ Correct Answer: D. 6.25 inches

Efficient scheduling minimizes travel time and maximizes inspection coverage, a practical aspect of fire inspection management (not explicitly detailed in the IFC but implied in Section 106.2, Inspections). Selecting occupancies in the same geographic area (C) reduces travel, allowing more time for thorough inspections. Option A undermines the comprehensive nature of inspections required by IFC Section 106.1. Option B could compromise inspection quality, not efficiency. Option D focuses on violation history, which doesn’t inherently improve scheduling efficiency and may skew priorities. Thus, C is the most logical and IFC-aligned choice.

To determine the occupant load of a 50,000 gross square foot airport terminal concourse, we use the occupant load factor from 2021 IBC Table 1004.5.

Step 1: Identify the Occupant Load Factor for an Airport Concourse

According to IBC Table 1004.5, the occupant load factor for an airport terminal concourse is 20 sq. ft. per person (gross).

Step 2: Calculate the Occupant Load

50,00020=2,500 occupants\frac{50,000}{20} = 2,500 \text{ occupants}2050,000​=2,500 occupants

Reference to Fire Inspector Documentation:

1. 2021 International Building Code (IBC) – Table 1004.5 (Occupant Load Factor for Airport Concourses)

20 sq. ft. per person is assigned for airport concourses.

2. 2021 International Fire Code (IFC) – Section 1004.1.2 (Occupant Load Determination)

Gross area calculations must follow the correct occupant load factor per IBC Table 1004.5.

Detailed Explanation of Answer Choices:

Option A (Incorrect): 200 is too low based on proper calculations.

Option B (Incorrect): 500 is also too low.

Option C (Incorrect): 1,000 is below the required calculation.

Option D (Correct): 2,500 is the correct calculation based on IBC Table 1004.5.

Thus, the correct and verified answer is: D. 2,500.

Fire Inspection Report as Legal Documentation

A fire inspection report serves as an official record of inspection findings, compliance violations, and corrective actions required.

It provides documented evidence that can be used in legal proceedings if enforcement actions are necessary.

2. Legal Basis and ICC Reference

According to the International Fire Code (IFC) and NFPA Standards, a properly documented inspection report ensures that violations are enforceable in court.

The ICC Fire Inspector Study Guide (2021) emphasizes that an inspection report is a critical legal document that supports the fire department or authority having jurisdiction (AHJ) in case of disputes or appeals.

3. Retention of Reports (Why Other Options Are Incorrect)

Option B (must be copied to the building code official) – Not necessarily required unless local jurisdiction mandates coordination between fire and building code officials.

Option C (must be copied to the city manager or mayor's office) – Fire inspection reports are not typically sent to city administration unless they involve significant violations or policy concerns.

Option D (must be retained by the code official for a minimum of three years) – While record retention is required, the period varies by jurisdiction (some require 3 years, others more), making this an incomplete and less universally correct answer.

Reference Sources:

ICC Fire Inspector II Study Guide (2021)

International Fire Code (IFC) 2021 Edition

NFPA 1031: Standard for Professional Qualifications for Fire Inspector and Plan Examiner