Exact Extract
“Anchor point for mobility management on the user plane; PDU session node; Downlink data routing and forwarding; User-plane data detection and policy execution; Uplink service type identification; QoS-based packet filtering and processing.”
— Huawei 5G Training Material, Main Network Functions of the 5GC, UPF section, page 95.
Technical Deep Dive
The intended Huawei UDG command is DSP USERRUNINFOSTATE . Huawei UDG provides user-plane packet forwarding, traffic detection, QoS enforcement, and traffic statistics collection.
In policy-controlled packet processing, static and dynamic rules can determine how subscriber traffic is identified and handled.
Static rules are predefined packet-processing rules available in the configured rule database. When subscriber traffic matches a static rule, the UPF can maintain counters indicating the number of matching packets and the corresponding traffic volume.
Dynamic rules are installed or modified during session operation, commonly under SMF control through PFCP signalling. Dynamic rules can be associated with particular application flows, subscriber sessions, or policy-control decisions.
DSP USERRUNINFOSTATE is intended to display subscriber rule-matching and associated traffic statistics. This information helps engineers determine whether traffic is matching the expected policy rule, whether a configured rule is active, and whether the corresponding traffic counters are increasing.
The other commands primarily relate to subscriber context or session information rather than the specific rule-matching statistics described. For example, DSP PDUSESSION displays SMF PDU session information, including session and QoS attributes.
In a production UPF, packet detection and forwarding performance may be accelerated by DPDK, SR-IOV, or dedicated packet-processing hardware. The exact packet counter implementation depends on the platform.