Huawei video conferencing endpoints support point-to-point communication through direct IP-address dialing even when they are not registered with an H.323 gatekeeper or SIP registration server.
In a registered deployment, endpoints can use logical identifiers, such as H.323 numbers or SIP numbers, to establish calls. The associated signaling infrastructure resolves these identifiers and facilitates call routing.
When registration is unavailable, the endpoints can instead establish communication by directly addressing the destination endpoint's IP address.
Option A is correct because successful point-to-point communication does not inherently require registration with a central server, provided that the endpoints support compatible signaling and media capabilities and can communicate over the network.
Huawei's Lab Guide explicitly describes this procedure under Point-to-Point Call (Touch).
The administrator enters the destination endpoint's IP address in the meeting interface and initiates the call. The endpoint then attempts to establish the connection directly.
The guide further explains that, when the connection fails, engineers should verify network reachability and the accuracy of the destination IP address.
Firewalls, routing restrictions, and incompatible endpoint configurations can still prevent communication even when the addresses are correct.
The central distinction is that server registration enables number-based calling and centralized management, whereas direct IP dialing can support point-to-point calls independently.
Huawei reference: Lab Guide, Section 1.3.1.5, Point-to-Point Call (Touch), PDF pages 25–26; Section 1.3.2.5, Point-to-Point Call (Controller).