Exact Extract — Huawei DC908 Solutions and Technologies Introduction, Page 80
“DWDM DCI solution can provide much higher capacity (up to N*Tbps) between data centers over much longer distance.”
Technical Deep Dive:
Wavelength Division Multiplexing (WDM) is an optical transmission technique in which multiple optical wavelengths carry independent traffic channels over a shared fiber.
The principal distinction between CWDM and DWDM is their wavelength or frequency channel spacing, rather than system capacity alone.
Coarse Wavelength Division Multiplexing (CWDM) uses relatively widely spaced wavelength channels.
ITU-T G.694.2 specifies a CWDM wavelength grid with nominal channel spacing of 20 nm.
Dense Wavelength Division Multiplexing (DWDM) uses more closely spaced optical channels.
ITU-T G.694.1 defines the DWDM frequency grid, including channel spacings such as 100 GHz, 50 GHz, 25 GHz, and 12.5 GHz, together with flexible-grid arrangements.
DWDM can generally accommodate more optical channels within a particular optical spectrum and consequently support greater aggregate transmission capacity.
However, capacity is a resulting system characteristic, not the fundamental classification criterion.
Total system capacity depends on several factors:
• Number of available wavelengths.
• Transmission rate per wavelength.
• Supported optical spectrum.
• Modulation format and spectral efficiency.
For example, two DWDM systems using identical channel spacing can have different aggregate capacities because they use different per-channel transmission rates.
Technical Conclusion: B is correct.
Answer-key correction: The original explanation treats higher aggregate DWDM capacity as the basis for distinguishing CWDM and DWDM. That is technically inaccurate. The proper distinction is established by the respective spectral grids in ITU-T G.694.1 and G.694.2.