CWNP Updated CWNA-109 Exam Questions and Answers by abiha

PoE has different standards that define different power levels for PSEs and PDs. The original standard, IEEE 802.3af, defines two classes of PSEs: Class 3 (15.4 W) and Class 4 (30 W). The newer standard, IEEE 802.3at, also known as PoE+, defines four classes of PSEs: Class 0 (15.4 W), Class 1 (4 W), Class 2 (7 W), and Class 3 (12.95 W). The power level received at the PD is always lower than the power level provided by the PSE, due to cable resistance and power dissipation. The IEEE standards specify the minimum power level that must be received at the PD for each class of PSE. For a Class 4 PSE, the minimum power level received at the PD is 25.5 W910. References: CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 295; CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 289.

The security option for 802.11 networks that supports SAE and requires protected management frames is WPA3. WPA3 stands for Wi-Fi Protected Access version 3 and is the latest security standard for WLANs. WPA3 supports two modes: WPA3-Personal and WPA3-Enterprise. WPA3-Personal uses Simultaneous Authentication of Equals (SAE) as the key exchange protocol, which provides stronger protection against offline dictionary attacks and password guessing than WPA2-Personal. WPA3 also requires protected management frames, which are encrypted frames that prevent spoofing, replay, or denial-of-service attacks on management frames such as deauthentication or disassociation frames. WPA, WPA2, and OWE do not support SAE or require protected management frames. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 307; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 297.